I thought that it might work with IP.. after configuring a local DNS server, I now get unauthorized user which is a good sign.. Thanks a lot
________________________________________ From: sipx-users-boun...@list.sipfoundry.org [sipx-users-boun...@list.sipfoundry.org] On Behalf Of Todd Hodgen [thod...@frontier.com] Sent: Wednesday, October 20, 2010 8:31 PM To: 'Discussion list for users of sipXecs software' Subject: Re: [sipx-users] Registration issue Configure the domain name and not the IP address of your server. SipXecs will work much better when using domain name, as it has access to domain registration information that way – srv records, sips, etc. From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of David Sharafy Sent: Wednesday, October 20, 2010 4:53 PM To: sipx-users@list.sipfoundry.org Subject: [sipx-users] Registration issue Hi All, I have installed sipX today and all went well with the installation.. for hours and I have been trying to register a softphone and just can't make it to work. I have used Xlite, Zoiper and even Cisco 7940 phones... the registration is just timing out... I installed wireshark on the server , I see Request: Register then Status: 100 Trying and then Status: 408 Request timeout. - I can ping the server just fine - server is listening on port 5060 - I disable NAT on the server - used both IP and Host to register with the server -intranet subnets are set -ICE disabled on the softphone and also forced to use port 5060 - Configuration Test was done on the server, all passed except DHCP test which is not running on the network there is one thing that I see in wireshark is when getting error 408, I see that source port is 5060 and destination port is 7991.. could that be the reason? I have also attached the softphone phone debug to this email (see something about "trying to add a native transport on port: 5060" binding 0.0.0.0) User Datagram Protocol, Src Port: sip (5060), Dst Port: 7991 (7991) Source port: sip (5060) Destination port: 7991 (7991) more info: @|fEH[4?REGISTER sip:192.168.3.154 SIP/2.0 Via: SIP/2.0/UDP 192.168.3.252:23423;branch=z9hG4bK-d8754z-f5703e6aaf3c5c48-1---d8754z-;rport Max-Forwards: 70 Contact: <sip:2...@192.168.3.252:23423;rinstance=1f80df743b5a4e76> To: "200"<sip:2...@192.168.3.154> From: "200"<sip:2...@192.168.3.154>;tag=1a6a4c42 Call-ID: MmNiN2Y2NGYxYmRhYjJiMTYwZDA5MTNlMTgwYWM0ZTk. CSeq: 1 REGISTER Expires: 3600 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Supported: timer User-Agent: eyeBeam release 1104a stamp 54436 Content-Length: 0 @|e...@47<SIP/2.0 100 Trying From: "200"<sip:2...@192.168.3.154>;tag=e2302353 To: "200"<sip:2...@192.168.3.154> Call-Id: Njc1N2MxZWJkOGMzZDNiZGMyZDY5ZjE2MGVhMGM0NjQ. Cseq: 9 REGISTER Via: SIP/2.0/UDP 192.168.3.139:7991;branch=z9hG4bK-d8754z-92741d787c129a18-1---d8754z-;rport=7991 Content-Length: 0 @|e...@7sip/2.0 408 Request timeout From: "200"<sip:2...@192.168.3.154>;tag=e2302353 To: "200"<sip:2...@192.168.3.154>;tag=QrxaIm Call-Id: Njc1N2MxZWJkOGMzZDNiZGMyZDY5ZjE2MGVhMGM0NjQ. Cseq: 7 REGISTER Via: SIP/2.0/UDP 192.168.3.139:7991;branch=z9hG4bK-d8754z-b0763363264f5b11-1---d8754z-;rport=7991 Server: sipXecs/4.2.1 sipXecs/sipXproxy (Linux) Content-Length: 0 Thanks _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/