Well, he stated the following: I am testing with is routed to dest IP address "2ic.ca" which is the domain > sipx is configured for. >
So I would go with Firmware or gateway settings do not have lookup via SRV configured properly, or there's a timeout issue (like what your phones are experiencing). Try defining the SRV records in the internal Audiocodes table. The Audiocodes will look there first. Also, make sure you are running version 5.80a if the M1000 firmware. Mike On Wed, Nov 17, 2010 at 9:41 PM, Tony Graziano <tgrazi...@myitdepartment.net > wrote: > And if you manually did the config and are sending to the proxy via ip > address, well, it will only work if it is reolving via ip... > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: sipx-users-boun...@list.sipfoundry.org > <sipx-users-boun...@list.sipfoundry.org> > To: Discussion list for users of sipXecs software > <sipx-users@list.sipfoundry.org> > Sent: Wed Nov 17 21:38:49 2010 > Subject: Re: [sipx-users] Sipx high availability with Mediant > > On Wed, Nov 17, 2010 at 7:15 PM, Chris St Denis > <chris.stde...@vhisper.com> wrote: > > > My DNS records are setup as what the DNS Advisor provided, and a dig -t > > SRV > > _sip._udp.2ic.ca appears to give correct values > > > > _sip._udp.2ic.ca. 10800 IN SRV 1 0 5060 pbx2.2ic.ca. > > _sip._udp.2ic.ca. 10800 IN SRV 1 0 5060 pbx1.2ic.ca. > > > > So the questions: > > 1. How do I fix it so the audiocodes correctly fails over when either of > > the > > PBX servers fail? > > Looks like your Audiocodes isn't properly handling the SRV records. I > can't speak for the audiocodes, but I had this issue with Patton a > while back and firmware fixed it. It might helpful to post your > Audiocodes firmware version and compare with some of the other > audiocodes users. > > > > > 2. Can I make the delay for internal & outgoing calls shorter when there > > is > > a pbx failure? > > > > This sounds like DNS again. Just a hunch. > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- There are 10 kinds of people in this world, those who understand binary and those who don't. mpic...@gmail.com blog: http://www.sipxecs.info call: sip:mpic...@sipxecs.info <sip%3ampic...@sipxecs.info>
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
