It is likely because you have no relevant user of "300" in exchange voicemail. your voicemail rule does should just redirect to exchange sending the same digits as to sipx and exchange instead of hardcoding one user via the rule.
So, can you dial "7+sipxuser" and get to the exchange system? If so, does exchange recognize the "user" part? ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: tgrazi...@myitdepartment.net LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: sipx-users-boun...@list.sipfoundry.org <sipx-users-boun...@list.sipfoundry.org> To: Discussion list for users of sipXecs software <sipx-users@list.sipfoundry.org> Sent: Sun Nov 28 18:25:05 2010 Subject: Re: [sipx-users] SIPX Exchange UM Config I still don't understand why I am not being redirected by default to the Exchange Voicemail if I configured user's UM for Exchange Voicemail. Unless you are saying that this default functionality only works for SIPX's Voicemail. In which case I am forced to forward the calls to the Exchange Voicemail Mailbox or 7300. Also, the greeting selection in UM section, doesn't really have relevance to Exchange Voicemail. Thanks On Sun, Nov 28, 2010 at 4:53 PM, Tony Graziano <tgrazi...@myitdepartment.net> wrote: > And adding a prefix to the voicemail dialing plan for exchange was missing > and resolves this. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: Tony Graziano <tgrazi...@myitdepartment.net> > To: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> > Sent: Sun Nov 28 16:03:58 2010 > Subject: Re: [sipx-users] SIPX Exchange UM Config > > Is there an entry in your dialplan to send the call to the exchange > server? > It would need to be a voicemail plan with its own prefix. > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: sipx-users-boun...@list.sipfoundry.org > <sipx-users-boun...@list.sipfoundry.org> > To: Discussion list for users of sipXecs software > <sipx-users@list.sipfoundry.org> > Sent: Sun Nov 28 15:43:52 2010 > Subject: Re: [sipx-users] SIPX Exchange UM Config > > No, are you saying sipx expects srv dns entries for Exchange Voicemail? > > On Sun, Nov 28, 2010 at 3:38 PM, Tony Graziano > <tgrazi...@myitdepartment.net> wrote: >> Is there a reason you specified the IP instead of hostname? >> ============================ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: tgrazi...@myitdepartment.net >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> ----- Original Message ----- >> From: sipx-users-boun...@list.sipfoundry.org >> <sipx-users-boun...@list.sipfoundry.org> >> To: Discussion list for users of sipXecs software >> <sipx-users@list.sipfoundry.org> >> Sent: Sun Nov 28 15:30:20 2010 >> Subject: [sipx-users] SIPX Exchange UM Config >> >> I have set up a user 300. No UA is registered with this user. I have >> modifed this user's UM settings to point to Microsoft Exchange UM >> Voicemail Server. I created a new voicemail dial plan specifying the >> Microsoft Exchange UM Voicemail Server and it's ip address. >> >> However, when I call extension 300, I am not getting to the server I >> specified in voicemail dial plan. I am not sure where I have gone >> wrong. >> >> Thanks in advance >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/