Talked to Jim C - I was registering to the FQDN - not the SRV - once I changed 
it to the SRV - the outbound caller-id was transformed correctly.


-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Nathaniel Watkins
Sent: Friday, March 11, 2011 2:00 PM
To: Discussion list for users of sipXecs software
Subject: Re: [sipx-users] Patton FXS gateway - how to register lines with 
sipxecs?

-------
#2 - see the wiki for examples for fxs config for patton!
-------

Sample Patton config did the trick.

Next part of the puzzle - it is only sending out the 4 digits for outbound 
caller-id.  So I changed the Subscriber Number on the FXS interface.  As soon 
as I change this to the full number - the phones attached to the FXS gateway no 
longer make outbound calls.

What field actually controls the outbound caller-id from the Patton.  I have it 
set on the user account in sipXecs - but that has no impact.


This message and any files transmitted with it are intended only for the 
individual(s) or entity named. If you are not the intended individual(s) or 
entity named you are hereby notified that any disclosure, copying, distribution 
or reliance upon its contents is strictly prohibited. If you have received this 
in error, please notify the sender, delete the original, and destroy all 
copies. Email transmissions cannot be guaranteed to be secure or error-free as 
information could be intercepted, corrupted, lost, destroyed, arrive late or 
incomplete, or contain viruses. Garrett County Government therefore does not 
accept any liability for any errors or omissions in the contents of this 
message, which arise as a result of email transmission.


 Garrett County Government,
203 South Fourth Street, Courthouse, Oakland, Maryland 21550 
www.garrettcounty.org _______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to