Me either. With 2.14, I got it to the point where it answered every other page. I found others with the exact same problem. I called Valcom, and within 60 seconds, they had sent me 2.17 and all was perfect. I have it in a paging group along with several polycom phones. It works perfect. Mine I'd a VIP 120 I believe. -----Original Message----- From: "Aaron Pursell" <aar...@esgw.org> Date: Wed, 11 May 2011 16:33:45 To: <mkitchin.pub...@gmail.com>; Discussion list for users of sipXecs software<sipx-users@list.sipfoundry.org> Subject: Re: [sipx-users] Cyberdata VOIP v1 paging amp won't register afterupgrade to 4.4.0
Ahh maybe that's the hold up then it only has 2.14, but I didn't see anything newer on their website. Aaron Pursell, Sr. Network Systems Administrator Easter Seals - Goodwill, Northern Rocky Mountain 4400 Central Ave Great Falls, Montana 59405 (406) 771-3721 aar...@esgw.org >>> "Matthew Kitchin (usenet/public)" <mkitchin.pub...@gmail.com> 5/11/2011 >>> 4:28 PM >>> My Valcom works fine in a paging group. It didn't until I called them and got firmware 2.17. -----Original Message----- From: "Aaron Pursell" <aar...@esgw.org> Sender: sipx-users-boun...@list.sipfoundry.org Date: Wed, 11 May 2011 15:19:06 To: Discussion list for users of sipXecs software<sipx-users@list.sipfoundry.org> Reply-To: Discussion list for users of sipXecs software <sipx-users@list.sipfoundry.org> Subject: Re: [sipx-users] Cyberdata VOIP v1 paging amp won't register after upgrade to 4.4.0 _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
