To take a late night stab at this, you will need to have the numbers defined in the system somewhere, either as an alias on an extension, or as an alias in one of your auto attendants.
If you don't define them as an alias, and your sipxbridge is not set to default calls to the auto attendant, you will get a message that the calls can't be completed as dialed generally. Add one of the did's to an extension and call to see if the call begins to go to that extension. From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of William Salt Sent: Tuesday, July 26, 2011 6:17 PM To: Discussion list for users of sipXecs software Subject: [sipx-users] Voip.ms DIDs - not routing to PBX I have set up my sipxecs system, and have bought 20 DIDs for our US office. When inbound calls are made to a DID, that are supposedly routed to my main account, i get a unsuccessful/failed tone (not sure which im english, and only visiting the US) However, my server never receives any traffic from the voip.ms servers (on the pbx and firewall), when i tcpdump i dont find any traffic from them. Do i have to set up sub-accounts with them, or do some config somewhere, or should i at least see voip.ms sending me some reuquests? Regards Will _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1390 / Virus Database: 1518/3790 - Release Date: 07/26/11
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
