Nettica.com should work. If you only have one server, you don't need srv records, but dns should be running on sipx server and it should be configured automatically On Mar 19, 2012 3:53 PM, "Stiles Watson" <wat...@datatek-net.com> wrote:
> Are there instructions for setting up SRV records with Godaddy? I do not > plan to ever ad servers, but if this is the preferred way. If no one like > Godaddy for this, are there DNS providers which work well for this setup? > > I tried a couple of months ago to get SRV recs set up, but I had a problem > with the _sip._tcp.rr record I asked about in my original email. Godaddy is > not setup to except it. > > Stiles > > On 03/19/2012 02:38 PM, Michael Picher wrote: > > Changing the SIP domain is a bad thing to do... > > If you want to use A-Records, you should start that way. > > I'd suggest another reinstall and do it with A-Records.... > > Be aware if you use A-Records you can not just add servers to the > cluster. This assumes SRV records. > > Mike > > On Mon, Mar 19, 2012 at 2:31 PM, Stiles Watson <wat...@datatek-net.com>wrote: > >> This is a follow up question to a problem I submitted about 2 months >> ago. Long story short, I reinstalled sipxecs 4.2 and made the sipxecs >> server the DHCP and DNS servers as well. This solved some of my issues, >> but not all. I still am unable to transfer incoming calls to any >> extension. I can dial out from any ext, I can dial ext to ext, I can >> dial into the system and the Auto Attendant answers, but when I dial an >> ext I get "Please hold while I transfer your call" but the ext never >> rings. The CDR says the call was transfered and there is no error >> reported. >> >> All calls in and out of sipxecs are through a SIP Trunk via Flowroute. >> I'm using Polycom SoundPoint IP 335 phones. My firewall is a Sonicwall >> NSA, with SIP Transformations turned off and H.323 turned off, and >> consistent NAT enabled. RTP ports 30000-31000 UDP, SIP port 5060 UDP & >> TCP, SIP port 5080 UDP all open and NAT rules set up to send traffic on >> these ports to the sipxecs server. I have to support remote phones. >> >> My external DNS records are through godaddy and the only record for >> sipxecs is an A record. I've followed the instructions at >> http://wiki.sipfoundry.org/display/sipXecs/DNS+Concepts+for+sipXecs for >> setting up A records and have changed the domain name to the fully >> qualified domain under System-->Domain. I clicked Apply, restarted the >> services and then rebooted. I also sent new profiles to the phones. This >> also required me to change the internal DNS zone file to use the fully >> qualified domain. After doing this I restarted the named service. >> >> DNS advisor runs successfully, but the DNS test under >> Diagnostics-->Configuration Tests returns a warning that SRV records for >> the unqualified domain can not be found: >> >> Starting DNS servers test. >> DNS testing of name server: voip.datatek-net.com >> NAPTR Lookup for datatek-net.com domain: >> No NAPTR records found. >> >> SRV Lookup for Target: _sip._udp.datatek-net.com >> No SRV records found. >> >> SRV Lookup for Target: _sip._tcp.datatek-net.com >> No SRV records found. >> >> SRV Lookup for Target: _sips._tcp.datatek-net.com >> No SRV records found. >> >> Why is the test looking for SRV records for datatek-net.com and not >> voip.datatek-net.com (which exist and which I had to add to make the DNS >> advisor happy)? >> >> There is one record in the internal DNS config that I do not understand: >> >> ; SRV record for service SIP TCP rr.voip.datatek-net.com >> ; priority: 1 weight: 0 port: 5070 server: voip.datatek-net.com >> ; >> _sip._tcp.rr.voip.datatek-net.com. IN SRV 1 0 5070 >> voip.datatek-net.com. >> >> Why is port 5070 being used and for what? >> >> Thanks for your help... >> >> Stiles >> >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > Michael Picher, Director of Technical Services > eZuce, Inc. > > 300 Brickstone Square > > Suite 201 > > Andover, MA. 01810 > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com > > > ------------------------------------------------------------------------------------------------------------ > There are 10 kinds of people in the world, those who understand binary and > those who don't. > > > > _______________________________________________ > sipx-users mailing listsipx-us...@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
