Hi Jan
  Still ISO not yet ready...AFAIK "DNS and DHCP" should be taken while 
install centos-6...Just point the browser 
"http://FQDN/sipxconfig/app"after sipxecs-setup is done ..It should work..

Note:
  4.6 build centos-6 is required...

Regards,
Kumaran T

Jan Fricke wrote:
>
> Hi,
>
> I’m trying to install a testsystem based on 0.0.4.5.2 and got some 
> problems.
>
>  
>
> - What is the state of the 0.0.4.5.2 iso? Just installed it and can’t 
> update because it is CentOS 5.x based and there are only repos for 
> CentOS 6 and Fedora.
>
> - What's wrong with the way I try to install 0.0.4.5.2 on CentOS 6 
> from the repo?
>
>                 - Installed CentOS 6.2 minimal
>
>                 - Hostname sipx.test.local
>
>                 - configured static ip
>
>                 - disabled selinux & iptables
>
>                 - yum update
>
>                 - got 
> http://download.sipfoundry.org/pub/sipXecs/sipxecs-0.0.4.5.2-centos.repo
>
>                 - yum install epel-release
>
>                 - yum groupinstall sipxecs
>
>                 - reboot
>
>                 - sipxecs-setup
>
>                                Is this the first server in your 
> cluster? [ enter 'y' or 'n' ] : y
>
>                                Configuring as the first server...
>
>                                Enter system host name without the 
> domain name [ press enter for 'sipx' ] :
>
>                                Enter domain name : test.local
>
>                                Tip: Use 'sipx.test.local' as your SIP 
> domain if you are setting up for the first
>
>                                time or if you know you are only going 
> to setup one server. This can make configuration
>
>                                easier.  You can always change the 
> value later.
>
>                                Enter SIP domain name [ press enter for 
> 'test.local' ] :
>
>                                Enter SIP realm [ press enter for 
> 'test.local' ] :
>
>                                Configuring system, this may take a few 
> minutes...
>
>                                done.
>
> - What now? There are no scripts to start services 
> (/etc/init.d/sipxecs start). No sipXecs-system-setup that e.g. creates 
> dns zones or configures dhcp. Did I
>
>   miss an wiki article? Is there any documentation how to install it?
>
>  
>
>  
>
> - Is there a release date for SipX 4.6 and openUC 4.6?
>
>  
>
> Jan
>
>  
>
> _____________________________
> Jan Fricke (B.Sc.)
>
> *IANT -
> APPLIED NGN-TECHNOLOGIES
>
> **Turn-Key VoIP/UC Solutions and More...
>
>
> *Fon: +49 (5331) 6794 0
> Fax: +49 (5331) 6794 499
> Mail: jan.fri...@iant.de <mailto:jan.fri...@iant.de>
> Web: www.iant.de <http://www.iant.de/en/startseite>
>
>
> IANT is eZuce <http://www.ezuce.com/> Elite Partner for EMEA
>
> IANT is Member of GROUPLINK <http://www.grouplink.de/>
>
>
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/

_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to