Hi, I am new with systemimager and have a few questions:
local.cfg: where should I put the local.cfg when I boot over LAN/PXE ? When I put it just to my /tftpboot/systemimager, than it would be used for all nodes, but local.cfg is node specific. static IP adresses: when I installed a node from an golden image with PXE, than all went ok and the new node has a static ip-adress assigned. But it is the same adress, that the dhcpd is also using in the range-definition. and these adresses are beeing reused by dhcpd after the max-lease-time. Is it possible to use one set of ip adresses for dhcp and a different for the fixed ip adress of the installed node ? install loop: how do you handle the problem, that the node will be installed in a loop, when you have LANboot as first boot device in the BIOS setting. when the LANboot is not the first in the BIOS boot sequence, you have to manually request LANboot for the autoinstall, if the disk is already bootable. I want to all with no manual intervention. thanks and best regards, Hildburg thanks, Hildburg ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users
