Re: [Sisuite-users] mkautoinstalldiskette problem

Mark Seger Tue, 11 May 2004 11:05:27 -0700

re: --config swich - I just put my local.cfg file on the floppy as the documentation says to do and it does get read in correctly. as for the network driver, I know I have a valid one becuase when the local.cfg file isn't present it starts talking to a dhcp server. -mark

Message: 10
Subject: Re: [Sisuite-users] mkautoinstalldiskette problem
To: [EMAIL PROTECTED]
From: [EMAIL PROTECTED]
Date: Tue, 11 May 2004 12:42:05 -0400
Reply-To: [EMAIL PROTECTED]


mkautoinstalldiskette need to have the "--config <FILE>"  with a supplied
local.cfg.

here is a template...

HOSTNAME=
DOMAINNAME=
DEVICE=
IPADDR=
NETMASK=
NETWORK=
BROADCAST=
GATEWAY=
GATEWAYDEV=
IMAGESERVER=
IMAGENAME=

As for the network issue.   Check on what driver do you need, and what
version of that driver your hardware needs.  Most likely the driver is not
in the standard boot image and you will either need to make a new one with
the module turned on or patched.

If it is a broadcom 570x network device I can give you more help.

------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Sisuite-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/sisuite-users

Re: [Sisuite-users] mkautoinstalldiskette problem

Reply via email to