Ole Holm Nielsen wrote:

I'm testing the latest SystemImager 3.3.2 from the CVS for
installation of a rather fast client node.

The installation image is about 1.5 GB in size, but it takes
unreasonably long to transfer the disk image using rsync: over
10 minutes, or a mere 2.5 MB/sec effective transfer speed.
There's only one server (fast !) and the client node on this
100 Mbit/s Ethernet, so the bottleneck ought to be in the
client node.  On slower, older client nodes and SI 2.0.2 we're
doing at least a factor of 2 faster !

I'm speculating that the SystemImager boel kernel somehow doesn't
activate DMA disk access but uses slower PIO in stead, but I
don't know how to check the disk access mode during installation.

Can anyone offer suggestions for how to improve the installation
speed ?  Can we add the "hdparm" utility to the installation
and manually set the DMA mode ?


Ole,

 I usally to this in my master script:

 # RB: we need this to enable DMA mode
 echo "Loading ide chipset modules.."
 modprobe amd74xx
 modprobe via82cxxx

 # BvdV: speed up the hardisk
 #
 # Setting harddisk speed to maximum!
 /sbin/hdparm -d 1 -c 1 /dev/hda


If i get an different ide chipset i compile it as module and include it in the scripts.



-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Sisuite-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/sisuite-users

Reply via email to