Morning Brad.

First question I will ask is sort of dumb, but what kind of disk space is on the HS20s?  Are you booting from them from local hard drives on each blade?  Are you attached to a SAN?  

In DHCP, you can tie a specific IP address to a specific MAC address.  So that is how you can make sure a given blade gets the same IP address every time.

I have used system-imager for rolling out images across SAN booting HS20 blades.  There are some tweaks you have to make to get that to work, based on needing an HBA driver and a multi-path SAN driver.  If this is what you are doing, let me know and I will be happy to share what I did to get SI behaving with a SAN.

Have a good day!

============================================
Greg Hartzog
Storage Engineer

(678) 969-1490 (DID)
(877) 848-6784 Ext 2533 (Toll Free)
(678) 969-1491 (fax)
(678) 575-7616 (mobile)

[EMAIL PROTECTED]

Optimus Solutions
22 Technology Parkway
Norcross, Georgia  30092

************************************************************************
The information contained in this message and any attachments is confidential and intended only for the named recipient(s).  If you have received this message in error, you are prohibited from copying, distributing or using the information.  Please contact the sender immediately by return email and delete the original message.
************************************************************************



Brad Fulda <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]

05/16/2005 06:33 PM

Please respond to
[email protected]

To
[email protected]
cc
Brad Fulda <[EMAIL PROTECTED]>
Subject
[Sisuite-users] (no subject)





Hey All,

We have in our lab 144 new IBM HS-20 Blades running RH 9.  All I need  
to be able to do is to load a OS across the network.  We have looked  
at Xcat, Ghost, and now this, System Imager.  Xcat offers way more  
than we need.  Ghost still requires you to use "floppies" and SI  
seems to be the ticket.
What I was wondering is "specifically" can SI be used for this? (it  
appears to )  What barriers might I come across?  I want static IP's  
but I was reading that I needed to have a DHCP srver running.  What  
do I need to do to allow for static IP's?  Can I make a master image  
that is custom for each system.  Meaning, I dont want to go back to  
each new system I just made and manually change host names, etc.  Is  
there also a how to mini  on the setup specifically for these blades  
we have?  Any help will be very much appreciated.  thanks


Brad Fulda
FCS Mobile Node Team
3D Research Corporation
(256) 325-5949




-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.  How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.  
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
Sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users

Reply via email to