Hi Chris: On Thu, Jul 10, 2008 at 2:51 PM, Chris Walker <[EMAIL PROTECTED]> wrote:
> I'd like to use systemimager to set up a few Sun x4500s, which each > have 48 disks (/dev/sd[a-z] and /dev/sda[a-v]), but si_prepareclient > only recognizes the first 26 disks (/dev/sd[a-z]). Is there a > workaround for clients with more than 26 disks? Looking through > si_prepareclient, it appears that I can just change the loop over > /proc/partitions, but I'm not sure if the rest of systemimager will > understand these changes. I don't have experience with that many disks. My advice to you would be to try it, and report back any issues. Even better, you can write up a patch and we'll review and check that into our repository. I guess the key is to look at the .master script (or the template) and see if there are any other issues with supporting 26+ disks. Thanks! Bernard ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
