if you do mkswap by hand on this HD from an installed system (like dvd or
floppy), is it work ?
----- Original Message -----
From: Jeffrey Strope
To: sisuite-users@lists.sourceforge.net
Sent: Monday, April 06, 2009 10:31 AM
Subject: [sisuite-users] FW: autoinstall from iso fails with disk error
The golden client system has 2 80GB hard drives in a hardware RAID 1
configuration. On the golden client, those systems are /dev/sda and /dev/sdb.
Here is the /etc/fstab from that system:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/mapper/isw_ebcbaceghc_Volume01
UUID=31481579-4f75-4451-930e-f0da6a8e7cfb / ext3
defaults,errors=remount-ro 0 1
# /dev/mapper/isw_ebcbaceghc_Volume05
UUID=51e3e45e-13db-4102-a479-4abcf8ca2ee4 none swap sw
0 0
If I do a ls -la /dev/mapper/ on that system, I get:
crw-rw---- 1 root root 10, 60 2009-04-05 13:55 control
brw-rw---- 1 root disk 254, 0 2009-04-05 13:55 isw_ebcbaceghc_Volume0
brw-rw---- 1 root disk 254, 1 2009-04-05 13:55 isw_ebcbaceghc_Volume01
brw-rw---- 1 root disk 254, 2 2009-04-05 13:55 isw_ebcbaceghc_Volume05
However, when I do the same on the busybox prompt, I only get the record for
"control". The isw_ block level devices are not being recreated by System
Imager. Doing an fdisk -l on the desired clone does show /dev/sda and /dev/sdb,
so the disks are there. Any ideas why System Imager isn't creating these
devices? Is there something special I need to do in si_prepareclient to allow
this?
Best,
Jeff
From: Infos E-Blokos [mailto:in...@e-blokos.com]
Sent: Monday, April 06, 2009 10:10 AM
To: sisuite-users@lists.sourceforge.net
Subject: Re: [sisuite-users] autoinstall from iso fails with disk error
weird, if the script can mount other partition there is no reason that it
can't mount this one.
is it ext3 ?
----- Original Message -----
From: Jeffrey Strope
To: sisuite-users@lists.sourceforge.net
Sent: Monday, April 06, 2009 10:05 AM
Subject: Re: [sisuite-users] autoinstall from iso fails with disk error
Doing that gives me:
"mount: mount point /dev/mapper/isw_ebcbaceghc_Volume05 does not exist"
Best,
Jeff
From: Infos E-Blokos [mailto:in...@e-blokos.com]
Sent: Sunday, April 05, 2009 7:54 PM
To: sisuite-users@lists.sourceforge.net
Subject: Re: [sisuite-users] autoinstall from iso fails with disk error
before the command line mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05
put "mount /dev/sdX /dev/mapper/isw_ebcbaceghc_Volume05"
Franck
----- Original Message -----
From: Jeffrey Strope
To: sisuite-users@lists.sourceforge.net
Sent: Sunday, April 05, 2009 4:30 PM
Subject: Re: [sisuite-users] autoinstall from iso fails with disk error
I've tried that, but might be missing something. Here's the portion of my
image.master script that fails:
logmsg "mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout"
mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout
logmsg "swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout"
swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout
When I'm at the busybox prompt, and do an "ls -la /dev/mapper/" all I see
is a file named "control".
What should I mount before this executes?
Best,
Jeff
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
------------------------------------------------------------------------------
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
------------------------------------------------------------------------------
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
