hi all,
i am using SIS as part of the OSCAR cluster management software. i am running
into a problem where when i network boot a node to install it, it gets an
address from dhcp just fine, then tftp starts up, it finds the default config
file, but then when the server tries to send over the kernel, it hangs. on the
client side, it's just stopped at the "boot" prompt. on the server,
/var/log/messages is filled with:
atftpd[20082]: serving kernel to 192.168.1.104:57100
atftpd[20082]: timeout: retrying...
atftpd[20082]: serving kernel to 192.168.1.104:57100
atftpd[20082]: timeout: retrying...
on and on.
i've checked all the standard stuff -- no firewalls, the kernel file is world
readable, i even connected the two systems with a cross-over cable in case
there was something goofy on the switch.
i've used this same version of OSCAR to install a handful of other clusters,
and have never had any trouble. i don't know what's up. has anyone seen
anything like this or have any suggestions of where i might look to see what's
up?
thanks,
--Joe
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users
