Olivier, Thanks. So far I have installed the rpm's on a dl380G7 with rhel6.3 x86_64 and both prepared the image(uyok) and retrieved from a similar server with the server packages loaded.Next step will be to test load the image on another server using both the standard and uyok ( I'm a little gun shy tryingto load back to the same server incase there are problems).
I also re-applied the changes I've itemized below for the same reasons - btw the change below to rcS(start udev BEFORE load_my_modules) might address why you had similar problems ie needing the pre-install script to load the modules). - David K Livingstone CN Signals and Communications 10229 127 Avenue floor 2 Walker Operations East Building Edmonton, AB, T5E 0B9 Ph : 780 472-3959 Fax : 780 472-3046 Email: david.livingst...@cn.ca From: LAHAYE Olivier <olivier.lah...@cea.fr> To: "sisuite-users@lists.sourceforge.net" <sisuite-users@lists.sourceforge.net> Date: 2013/01/07 02:05 Subject: [sisuite-users] RE : Which version ? Hi, You can try the 4.3.0-0.1svn version, it worked for me. You'll need pre and post-install scripts available here: http://olivier.lahaye1.free.fr/RPMS/extra/ Cheers, -- Olivier LAHAYE CEA DRT/LIST/DCSI/DIR De : david.livingst...@cn.ca [david.livingst...@cn.ca] Date d'envoi : mercredi 19 décembre 2012 00:09 À : sisuite-users@lists.sourceforge.net Objet : [sisuite-users] Which version ? I have been using a modified version of 4.1.99.svn4556_bli-1 to load my i386 rhel6.x servers as described below. I am now looking at imaging similar machines but now with the x86_64 version of rhel6.3 so I need like initrd_template( and boot_standard if it works) packages. What versions should I be trying ? http://olivier.lahaye1.free.fr/RPMS/noarch/ ?? Thanks David K Livingstone CN Signals and Communications 10229 127 Avenue floor 2 Walker Operations East Building Edmonton, AB, T5E 0B9 Ph : 780 472-3959 Fax : 780 472-3046 Email: david.livingst...@cn.ca ----- Forwarded by David Livingstone/LIVING03/CNR/CA on 2012/12/18 16:00 ----- From: David Livingstone/LIVING03/CNR/CA To: sisuite-users@lists.sourceforge.net Date: 2012/03/29 09:41 Subject: Loading RHEL 6.2 using 4.1.99.svn4556_bli-1 Using systemimager 4.1.99.svn4556_bli-1(ext4 enabled version) I have successfully imaged a RHEL 6.2 image to HP DL380G7 hardware(p410 array controllers). I was considering using SALI however for RHEL6.x grub2 is not an issue and ext4 support is included in 4.1.99.svn4556_bli-1. The setup I was imaging is a Proliant DL380G7 server with two p410 controllers(p401i and p410) with raid1 for root/boot/swap on the p410i and raid5 for /data on the p410. The system is running the latest RHEL 6.2. The attempted to image the system in two ways: 1. standard kernel 2. uyok 1. standard kernel I eventually got this to work but only after major modifications to the install script and manually setting up grub. The major issue here is that the default kernel uses the cciss driver and device naming(ex /dev/cciss/c0d0p2) and the RHEL6.x uses the hpsa driver(scsi naming ex /dev/sda). See http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02677069/c02677069.pdf . In general RHEL 5.x and before uses the cciss driver and RHEL6.x uses the hpsa when possible. I presume the standard kernel could be built with the hpsa module and some version logic applied to resolve this. 2. uyok This worked successfully after making some changes to address : - Needed modules(ie hpsa) as symbolic links under /lib/modules/(uname -r) ex [root@scdev ~]# ls -al /lib/modules/2.6.32-220.4.2.el6.i686/weak-updates/hpsa/hpsa.ko 0 lrwxrwxrwx 1 root root 50 Mar 5 04:05 /lib/modules/2.6.32-220.4.2.el6.i686/weak-updates/hpsa/hpsa.ko -> /lib/modules/2.6.32-71.el6.i686/extra/hpsa/hpsa.ko [root@scdev ~]# This results in the modules not being copied correctly in the generated initrd. I resolved this by modifying the UseYourOwnKernel.pm rsync invocations to copy the resultant files(the L rather then the l option. I include the diff below. - Numerous /lib/firmware files were missing in the initrd. By default the bnx2 nic driver(driver for the four nic's on the motherboard) as well as others in the RHEL6.2 kernel request firmware which is missing in the uyok initrd. I got this to work by : - modifying UseYourOwnKernel.pm to copy /lib/firmware to the initrd. Unfortunately this copies all of firmware as I couldn't figure out how to dynamically copy what was needed. - modified rcS under the std template to start udev BEFORE the modules are inserted. - rcS : start udev before loading modules. - under the std template : /usr/share/systemimager/boot/i386/standard/initrd_template/etc/init.d/rcS - The ramdisk_size must be set high enough to accept the larger initrd. - I had to si_cpimage as part of testing and noted that for yuok the kernel and initrd.img files are not copied. They had to be copied manually. Notes : When creating the image initially I also had to change si_prepareclient to use parted rather then sfdisk. I believe a bug was submitted on this a long time ago which was never applied. parted supports gpt partitions and sfdisk does not. [root@nasmtl sbin]# diff si_prepareclient si_prepareclient.orig.4.1.99.svn4556_bli 969,971c969,971 < # if($arch eq "i386") { < # $preferred_tool = 'sfdisk'; < # } --- > if($arch eq "i386") { > $preferred_tool = 'sfdisk'; > } - Diff for UseYourOwnKernel.pm [root@nasmtl SystemImager]# diff UseYourOwnKernel.pm UseYourOwnKernel.pm.orig 152c152 < $cmd = qq(rsync -aL --exclude=build --exclude=source ) . --- > $cmd = qq(rsync -a --exclude=build --exclude=source ) . 159c159 < $cmd = qq(rsync -aLR $module $staging_dir); --- > $cmd = qq(rsync -aR $module $staging_dir); 223,225d222 < # < # Copy /lib/firmware file to initrd < # 227,233d223 < if (-d "/lib/firmware") { < # copy entire firmware tree to new initrd. < $cmd = qq(rsync -aLR /lib/firmware $staging_dir); < !system( $cmd ) or die( "Couldn't $cmd." ); < < } < - Diff for rcS : [root@nasmtl init.d]# diff rcS rcS.orig 45,47d44 < # Start udev BEFORE load_my_modules so the modules can load firmware if needed. < start_udevd < 49a47,48 > start_udevd > David K Livingstone CN Signals and Communications 10229 127 Avenue floor 2 Walker Operations East Building Edmonton, AB, T5E 0B9 Ph : 780 472-3959 Fax : 780 472-3046 Email: david.livingst...@cn.ca ------------------------------------------------------------------------------ Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS, MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft MVPs and experts. SALE $99.99 this month only -- learn more at: http://p.sf.net/sfu/learnmore_122412 _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
------------------------------------------------------------------------------ Master Java SE, Java EE, Eclipse, Spring, Hibernate, JavaScript, jQuery and much more. Keep your Java skills current with LearnJavaNow - 200+ hours of step-by-step video tutorials by Java experts. SALE $49.99 this month only -- learn more at: http://p.sf.net/sfu/learnmore_122612
_______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
