https://git.altlinux.org/tasks/402937/logs/events.15.1.log https://packages.altlinux.org/tasks/402937
subtask name aarch64 i586 x86_64 #2200 PrusaSlicer failed - failed 2026-Jan-17 02:07:46 :: test-only task #402937 for p11 resumed by romenskiy: #100 removed #200 removed #300 removed #400 removed #500 removed #520 removed #540 removed #600 removed #700 removed #740 build 2020.2-alt3 from /people/romenskiy/packages/qhull.git fetched at 2026-Jan-16 16:22:56 #760 build 0.4.1-alt1 from /people/romenskiy/packages/heatshrink.git fetched at 2026-Jan-16 16:23:24 #770 build 3.11.0-alt1 from /people/romenskiy/packages/catch.git fetched at 2026-Jan-16 16:23:53 #774 build 0.0-alt1 from /people/romenskiy/packages/libbgcode.git fetched at 2026-Jan-16 16:24:14 #776 build 2023.12.02-alt1 from /people/romenskiy/packages/nanosvg-fltk.git fetched at 2026-Jan-16 16:26:11 #1000 removed #1100 removed #1200 removed #1240 build 4.15.4-alt1 from /gears/z/z3.git fetched at 2025-Dec-15 15:22:53 #1300 removed #1400 removed #1500 removed #1600 removed #1700 removed #2000 removed #2100 removed #2200 build 2.9.4-alt1 from /people/romenskiy/packages/PrusaSlicer.git fetched at 2026-Jan-16 16:26:49 #2300 build 2.7.61.10-alt1 from /people/romenskiy/packages/SuperSlicer.git fetched at 2026-Jan-16 16:27:26 2026-Jan-17 02:07:47 :: created build repo 2026-Jan-17 02:07:48 :: [aarch64] #740 qhull.git 2020.2-alt3: build start 2026-Jan-17 02:07:48 :: [i586] #740 qhull.git 2020.2-alt3: build start 2026-Jan-17 02:07:48 :: [x86_64] #740 qhull.git 2020.2-alt3: build start 2026-Jan-17 02:08:05 :: [i586] #740 qhull.git 2020.2-alt3: build OK (cached) 2026-Jan-17 02:08:05 :: [i586] #760 heatshrink.git 0.4.1-alt1: build start 2026-Jan-17 02:08:18 :: [i586] #760 heatshrink.git 0.4.1-alt1: build OK (cached) 2026-Jan-17 02:08:18 :: [i586] #770 catch.git 3.11.0-alt1: build start 2026-Jan-17 02:08:23 :: [aarch64] #740 qhull.git 2020.2-alt3: build OK (cached) 2026-Jan-17 02:08:23 :: [aarch64] #760 heatshrink.git 0.4.1-alt1: build start 2026-Jan-17 02:08:27 :: [x86_64] #740 qhull.git 2020.2-alt3: build OK (cached) 2026-Jan-17 02:08:27 :: [x86_64] #760 heatshrink.git 0.4.1-alt1: build start 2026-Jan-17 02:08:31 :: [i586] #770 catch.git 3.11.0-alt1: build OK (cached) 2026-Jan-17 02:08:31 :: [i586] #774 libbgcode.git 0.0-alt1: build start 2026-Jan-17 02:08:44 :: [i586] #774 libbgcode.git 0.0-alt1: build OK (cached) 2026-Jan-17 02:08:44 :: [i586] #776 nanosvg-fltk.git 2023.12.02-alt1: build start 2026-Jan-17 02:08:47 :: [aarch64] #760 heatshrink.git 0.4.1-alt1: build OK (cached) 2026-Jan-17 02:08:47 :: [aarch64] #770 catch.git 3.11.0-alt1: build start 2026-Jan-17 02:08:56 :: [x86_64] #760 heatshrink.git 0.4.1-alt1: build OK (cached) 2026-Jan-17 02:08:57 :: [i586] #776 nanosvg-fltk.git 2023.12.02-alt1: build OK (cached) 2026-Jan-17 02:08:57 :: [x86_64] #770 catch.git 3.11.0-alt1: build start 2026-Jan-17 02:08:57 :: [i586] #1240 z3.git 4.15.4-alt1: build start 2026-Jan-17 02:09:10 :: [aarch64] #770 catch.git 3.11.0-alt1: build OK (cached) 2026-Jan-17 02:09:11 :: [aarch64] #774 libbgcode.git 0.0-alt1: build start 2026-Jan-17 02:09:11 :: [i586] #1240 z3.git 4.15.4-alt1: build OK (cached) 2026-Jan-17 02:09:11 :: [i586] #2200 PrusaSlicer.git 2.9.4-alt1: build start 2026-Jan-17 02:09:27 :: [x86_64] #770 catch.git 3.11.0-alt1: build OK (cached) 2026-Jan-17 02:09:27 :: [x86_64] #774 libbgcode.git 0.0-alt1: build start 2026-Jan-17 02:09:27 :: [i586] #2200 PrusaSlicer.git 2.9.4-alt1: build SKIPPED 2026-Jan-17 02:09:27 :: [i586] #2300 SuperSlicer.git 2.7.61.10-alt1: build start 2026-Jan-17 02:09:35 :: [aarch64] #774 libbgcode.git 0.0-alt1: build OK (cached) 2026-Jan-17 02:09:35 :: [aarch64] #776 nanosvg-fltk.git 2023.12.02-alt1: build start 2026-Jan-17 02:09:43 :: [i586] #2300 SuperSlicer.git 2.7.61.10-alt1: build SKIPPED 2026-Jan-17 02:09:58 :: [x86_64] #774 libbgcode.git 0.0-alt1: build OK (cached) 2026-Jan-17 02:09:58 :: [aarch64] #776 nanosvg-fltk.git 2023.12.02-alt1: build OK (cached) 2026-Jan-17 02:09:59 :: [x86_64] #776 nanosvg-fltk.git 2023.12.02-alt1: build start 2026-Jan-17 02:09:59 :: [aarch64] #1240 z3.git 4.15.4-alt1: build start 2026-Jan-17 02:10:24 :: [aarch64] #1240 z3.git 4.15.4-alt1: build OK (cached) 2026-Jan-17 02:10:25 :: [aarch64] #2200 PrusaSlicer.git 2.9.4-alt1: build start 2026-Jan-17 02:10:29 :: [x86_64] #776 nanosvg-fltk.git 2023.12.02-alt1: build OK (cached) 2026-Jan-17 02:10:29 :: [x86_64] #1240 z3.git 4.15.4-alt1: build start 2026-Jan-17 02:11:02 :: [x86_64] #1240 z3.git 4.15.4-alt1: build OK (cached) 2026-Jan-17 02:11:02 :: [x86_64] #2200 PrusaSlicer.git 2.9.4-alt1: build start [aarch64] 675 | mAuxBufferPtrs.reset(new NonConstBufferType[auxBufferCount]); [aarch64] /usr/include/c++/13/new: In member function '__ct_base .constprop': [aarch64] /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here [aarch64] 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) [aarch64] opt.so /usr/lib64/libz3.so.4.15.4.0 [aarch64] gmake[2]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux' [aarch64] gmake[1]: Entering directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux' [aarch64] [ 62%] Built target libslic3r_tests [aarch64] gmake[1]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux' [aarch64] gmake: *** [Makefile:146: all] Error 2 2026-Jan-17 02:21:07 :: [aarch64] PrusaSlicer.git 2.9.4-alt1: remote: build failed 2026-Jan-17 02:21:07 :: [aarch64] #2200 PrusaSlicer.git 2.9.4-alt1: build FAILED 2026-Jan-17 02:21:07 :: [aarch64] requesting cancellation of task processing [x86_64] 675 | mAuxBufferPtrs.reset(new NonConstBufferType[auxBufferCount]); [x86_64] /usr/include/c++/13/new: In member function '__ct_base .constprop': [x86_64] /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here [x86_64] 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) [x86_64] opt.so /usr/lib64/libz3.so.4.15.4.0 [x86_64] gmake[2]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux' [x86_64] gmake[1]: Entering directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux' [x86_64] [ 62%] Built target libslic3r_tests [x86_64] gmake[1]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux' [x86_64] gmake: *** [Makefile:146: all] Error 2 2026-Jan-17 02:22:53 :: [x86_64] PrusaSlicer.git 2.9.4-alt1: remote: build failed 2026-Jan-17 02:22:54 :: [x86_64] #2200 PrusaSlicer.git 2.9.4-alt1: build FAILED 2026-Jan-17 02:21:07 :: [aarch64] build FAILED 2026-Jan-17 02:22:54 :: [x86_64] build FAILED 2026-Jan-17 02:22:54 :: task #402937 for p11 FAILED _______________________________________________ Sisyphus-incominger mailing list [email protected] https://lists.altlinux.org/mailman/listinfo/sisyphus-incominger
