https://git.altlinux.org/tasks/402937/logs/events.21.1.log https://packages.altlinux.org/tasks/402937
subtask name aarch64 i586 x86_64 #2600 PrusaSlicer failed - failed 2026-Jan-29 14:59:19 :: test-only task #402937 for p11 resumed by romenskiy: #100 removed #200 removed #300 removed #400 removed #500 removed #520 removed #540 removed #600 removed #700 removed #740 removed #750 build 2020.2-alt4 from /gears/q/qhull.git fetched at 2026-Jan-19 12:31:47 #760 removed #764 removed #766 build 0.4.1-alt2 from /people/romenskiy/packages/heatshrink.git fetched at 2026-Jan-29 13:23:57 #770 build 3.11.0-alt1 from /people/romenskiy/packages/catch.git fetched at 2026-Jan-16 16:23:53 #774 removed #776 removed #777 removed #1000 removed #1040 removed #1060 removed #1070 removed #1072 build 0.2.0-alt1 from /people/romenskiy/packages/libbgcode.git fetched at 2026-Jan-29 13:48:16 #1074 build 2023.12.02-alt2 from /people/romenskiy/packages/nanosvg-fltk.git fetched at 2026-Jan-29 13:39:53 #1100 removed #1200 removed #1220 removed #1240 build 4.15.4-alt1 from /gears/z/z3.git fetched at 2025-Dec-15 15:22:53 #1300 removed #1400 removed #1500 removed #1600 removed #1700 removed #2000 removed #2100 removed #2200 removed #2300 removed #2400 removed #2500 removed #2600 build 2.9.4-alt3 from /people/romenskiy/packages/PrusaSlicer.git fetched at 2026-Jan-29 14:50:50 #2700 build 2.7.61.10-alt3 from /people/romenskiy/packages/SuperSlicer.git fetched at 2026-Jan-29 14:54:58 2026-Jan-29 14:59:20 :: created build repo 2026-Jan-29 14:59:21 :: [i586] #750 qhull.git 2020.2-alt4: build start 2026-Jan-29 14:59:21 :: [x86_64] #750 qhull.git 2020.2-alt4: build start 2026-Jan-29 14:59:21 :: [aarch64] #750 qhull.git 2020.2-alt4: build start 2026-Jan-29 14:59:37 :: [i586] #750 qhull.git 2020.2-alt4: build OK (cached) 2026-Jan-29 14:59:38 :: [i586] #766 heatshrink.git 0.4.1-alt2: build start 2026-Jan-29 14:59:39 :: [x86_64] #750 qhull.git 2020.2-alt4: build OK (cached) 2026-Jan-29 14:59:39 :: [x86_64] #766 heatshrink.git 0.4.1-alt2: build start 2026-Jan-29 14:59:50 :: [i586] #766 heatshrink.git 0.4.1-alt2: build OK (cached) 2026-Jan-29 14:59:50 :: [i586] #770 catch.git 3.11.0-alt1: build start 2026-Jan-29 14:59:52 :: [x86_64] #766 heatshrink.git 0.4.1-alt2: build OK (cached) 2026-Jan-29 14:59:52 :: [x86_64] #770 catch.git 3.11.0-alt1: build start 2026-Jan-29 14:59:56 :: [aarch64] #750 qhull.git 2020.2-alt4: build OK (cached) 2026-Jan-29 14:59:56 :: [aarch64] #766 heatshrink.git 0.4.1-alt2: build start 2026-Jan-29 15:00:03 :: [i586] #770 catch.git 3.11.0-alt1: build OK (cached) 2026-Jan-29 15:00:03 :: [i586] #1072 libbgcode.git 0.2.0-alt1: build start 2026-Jan-29 15:00:05 :: [x86_64] #770 catch.git 3.11.0-alt1: build OK (cached) 2026-Jan-29 15:00:05 :: [x86_64] #1072 libbgcode.git 0.2.0-alt1: build start 2026-Jan-29 15:00:16 :: [i586] #1072 libbgcode.git 0.2.0-alt1: build OK (cached) 2026-Jan-29 15:00:16 :: [i586] #1074 nanosvg-fltk.git 2023.12.02-alt2: build start 2026-Jan-29 15:00:19 :: [x86_64] #1072 libbgcode.git 0.2.0-alt1: build OK (cached) 2026-Jan-29 15:00:19 :: [x86_64] #1074 nanosvg-fltk.git 2023.12.02-alt2: build start 2026-Jan-29 15:00:22 :: [aarch64] #766 heatshrink.git 0.4.1-alt2: build OK (cached) 2026-Jan-29 15:00:22 :: [aarch64] #770 catch.git 3.11.0-alt1: build start 2026-Jan-29 15:00:28 :: [i586] #1074 nanosvg-fltk.git 2023.12.02-alt2: build OK (cached) 2026-Jan-29 15:00:28 :: [i586] #1240 z3.git 4.15.4-alt1: build start 2026-Jan-29 15:00:32 :: [x86_64] #1074 nanosvg-fltk.git 2023.12.02-alt2: build OK (cached) 2026-Jan-29 15:00:32 :: [x86_64] #1240 z3.git 4.15.4-alt1: build start 2026-Jan-29 15:00:42 :: [i586] #1240 z3.git 4.15.4-alt1: build OK (cached) 2026-Jan-29 15:00:43 :: [i586] #2600 PrusaSlicer.git 2.9.4-alt3: build start 2026-Jan-29 15:00:46 :: [aarch64] #770 catch.git 3.11.0-alt1: build OK (cached) 2026-Jan-29 15:00:47 :: [aarch64] #1072 libbgcode.git 0.2.0-alt1: build start 2026-Jan-29 15:00:47 :: [x86_64] #1240 z3.git 4.15.4-alt1: build OK (cached) 2026-Jan-29 15:00:47 :: [x86_64] #2600 PrusaSlicer.git 2.9.4-alt3: build start 2026-Jan-29 15:00:58 :: [i586] #2600 PrusaSlicer.git 2.9.4-alt3: build SKIPPED 2026-Jan-29 15:00:58 :: [i586] #2700 SuperSlicer.git 2.7.61.10-alt3: build start 2026-Jan-29 15:01:10 :: [aarch64] #1072 libbgcode.git 0.2.0-alt1: build OK (cached) 2026-Jan-29 15:01:11 :: [aarch64] #1074 nanosvg-fltk.git 2023.12.02-alt2: build start 2026-Jan-29 15:01:14 :: [i586] #2700 SuperSlicer.git 2.7.61.10-alt3: build SKIPPED 2026-Jan-29 15:01:34 :: [aarch64] #1074 nanosvg-fltk.git 2023.12.02-alt2: build OK (cached) 2026-Jan-29 15:01:34 :: [aarch64] #1240 z3.git 4.15.4-alt1: build start 2026-Jan-29 15:02:00 :: [aarch64] #1240 z3.git 4.15.4-alt1: build OK (cached) 2026-Jan-29 15:02:00 :: [aarch64] #2600 PrusaSlicer.git 2.9.4-alt3: build start [x86_64] 675 | mAuxBufferPtrs.reset(new NonConstBufferType[auxBufferCount]); [x86_64] /usr/include/c++/13/new: In member function '__ct_base .constprop': [x86_64] /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here [x86_64] 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) [x86_64] /usr/lib64/libz3.so.4.15.4.0 [x86_64] gmake[2]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux' [x86_64] gmake[1]: Entering directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux' [x86_64] [ 62%] Built target libslic3r_tests [x86_64] gmake[1]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux' [x86_64] gmake: *** [Makefile:146: all] Error 2 2026-Jan-29 15:07:44 :: [x86_64] PrusaSlicer.git 2.9.4-alt3: remote: build failed 2026-Jan-29 15:07:44 :: [x86_64] #2600 PrusaSlicer.git 2.9.4-alt3: build FAILED 2026-Jan-29 15:07:44 :: [x86_64] requesting cancellation of task processing [aarch64] 675 | mAuxBufferPtrs.reset(new NonConstBufferType[auxBufferCount]); [aarch64] /usr/include/c++/13/new: In member function '__ct_base .constprop': [aarch64] /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here [aarch64] 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc) [aarch64] /usr/lib64/libz3.so.4.15.4.0 [aarch64] gmake[2]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux' [aarch64] gmake[1]: Entering directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux' [aarch64] [ 62%] Built target libslic3r_tests [aarch64] gmake[1]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux' [aarch64] gmake: *** [Makefile:146: all] Error 2 2026-Jan-29 15:12:56 :: [aarch64] PrusaSlicer.git 2.9.4-alt3: remote: build failed 2026-Jan-29 15:12:56 :: [aarch64] #2600 PrusaSlicer.git 2.9.4-alt3: build FAILED 2026-Jan-29 15:07:44 :: [x86_64] build FAILED 2026-Jan-29 15:12:56 :: [aarch64] build FAILED 2026-Jan-29 15:12:56 :: task #402937 for p11 FAILED _______________________________________________ Sisyphus-incominger mailing list [email protected] https://lists.altlinux.org/mailman/listinfo/sisyphus-incominger
