Seguinte, uso este comando para montar meu pen drive LG igualzinho o seu no Salck 8.1 , 9.0 e 9.1
mount -t vfat -o umask=0000 /dev/sda1 /mnt/flashcard N�o esquece de criar o diret�rio flashcard dentro de mnt ou onde voc� quiser. [],s Marcelo. x A0 ????A0 > Ola, pessoal. > > Nao estou conseguindo acessar minha pen drive LG 128MB > no slackware 9.1 (2.4.26). Abaixo os passos que segui: > criei o diretorio: > # mkdir -p /mnt/pendrive > conectei a pen drive > # mount -tvfat /dev/sda1 /mnt/pendrive > depois de algum tempo, me retorna a seguinte mensagem > de erro: > mount: wrong fs type, bad option, bad superblock on > /dev/sda1, > or too many mounted file systems. > > O que sera que pode estar errado? Alguem tem alguma > luz? > > saida do arquivo /var/log/syslog : > Jun 28 16:35:29 desktop kernel: usb.c: USB device 2 > (vend/prod 0xea0/0x2168) is not claimed by any active > driver. > Jun 28 16:35:32 desktop kernel: Vendor: LG > Model: FlashDrive Rev: 2.00 > Jun 28 16:35:32 desktop kernel: Type: > Direct-Access ANSI SCSI revision: > 02 > Jun 28 16:35:32 desktop kernel: Attached scsi > removable disk sda at scsi1, channel 0, id 0, lun 0 > Jun 28 16:35:32 desktop kernel: Current 00:00: sns = > 70 6 > Jun 28 16:35:32 desktop kernel: ASC=28 ASCQ= 0 > Jun 28 16:35:32 desktop kernel: Raw sense data:0x70 > 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 > 0x28 0x00 0x00 0x00 0x00 0x00 > Jun 28 16:35:32 desktop kernel: SCSI device sda: > 256000 512-byte hdwr sectors (131 MB) > Jun 28 16:35:32 desktop kernel: sda: Write Protect is > off > Jun 28 16:37:11 desktop kernel: usb_control/bulk_msg: > timeout > Jun 28 16:37:46 desktop last message repeated 5 times > Jun 28 16:37:56 desktop last message repeated 2 times > Jun 28 16:38:01 desktop kernel: usb-storage: > host_reset() requested but not implemented > Jun 28 16:38:11 desktop kernel: SCSI disk error : host > 1 channel 0 id 0 lun 0 return code = 6050000 > Jun 28 16:38:11 desktop kernel: I/O error: dev 08:01, > sector 0 > Jun 28 16:38:11 desktop kernel: FAT: unable to read > boot sector > > saida do /var/log/messages : > Jun 28 16:35:29 desktop kernel: hub.c: new USB device > 00:10.3-3, assigned address 2 > Jun 28 16:35:32 desktop kernel: Initializing USB Mass > Storage driver... > Jun 28 16:35:32 desktop kernel: usb.c: registered new > driver usb-storage > Jun 28 16:35:32 desktop kernel: scsi1 : SCSI emulation > for USB Mass Storage devices > Jun 28 16:35:32 desktop kernel: sda: Unit Not Ready, > sense: > Jun 28 16:35:32 desktop kernel: sda: sda1 sda2 sda3 > sda4 > Jun 28 16:35:32 desktop kernel: USB Mass Storage > support registered. > Jun 28 16:38:11 desktop kernel: scsi: device set > offline - command error recover failed: host 1 channel > 0 id 0 lun 0 > > saida do comando dmesg : > hub.c: new USB device 00:10.3-3, assigned address 2 > usb.c: USB device 2 (vend/prod 0xea0/0x2168) is not > claimed by any active driver. > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > scsi1 : SCSI emulation for USB Mass Storage devices > Vendor: LG Model: FlashDrive Rev: 2.00 > Type: Direct-Access ANSI SCSI > revision: 02 > Attached scsi removable disk sda at scsi1, channel 0, > id 0, lun 0 > sda: Unit Not Ready, sense: > Current 00:00: sns = 70 6 > ASC=28 ASCQ= 0 > Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a > 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00 > SCSI device sda: 256000 512-byte hdwr sectors (131 MB) > sda: Write Protect is off > sda: sda1 sda2 sda3 sda4 > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 2 > USB Mass Storage support registered. > usb_control/bulk_msg: timeout > > grato, > eduardo > > ______________________________________________________________________ > > Yahoo! Mail - agora com 100MB de espa�o, anti-spam e antiv�rus gr�tis! > http://br.info.mail.yahoo.com/ -- GUS-BR - Grupo de Usuarios Slackware - BR http://www.slackwarebrasil.org/ http://www.linuxmag.com.br/mailman/listinfo/slack-users
