Fiz EXATAMENTE o q vcs me recomendaram, s� que ao
iniciar a m�quina, d� um erro na inicializa��o falando
que n�o encontrou:
"opl3sa2: Control I/O port 0x370 not free
opl3sa2: There was a problem probing one of the ISA
PNP cards, continuing..."
gostaria de saber o porque disso, j� qu tenho certeza
q � essa a placa; agrade�o desde j�!
P.S.: Segue anexo o meu dmesg para maiores
esclarecimentos
--- Joao Victor da Costa <[EMAIL PROTECTED]>
escreveu:
> TonySP wrote:
> >>Estou com dificuldades em configurar a placa de
> som
> >>[OPL3-SA3] no notebook toshiba satellite 2535.
> >
> > Eu tive muuuitto tempo atr�s! (n�o em um note)
> >
> > Essa placa tem barramento ISA, eu configurava com
> isapnptools
> > #pnpdump > /etc/isapnp.conf
> #pnpdunp -c -o /etc/isapnp.conf
> eh importante verificar caso tenha problemas a sua
> configuracao na bios :D
>
> > Edite esse arquivo e descomente a sua
> configura��o, caso nenhuma tenha
> > sido detectada
> >
>
>
> --
> GUS-BR - Grupo de Usuarios Slackware - BR
> http://www.slackwarebrasil.org/
>
http://www.linuxmag.com.br/mailman/listinfo/slack-users
>
--------------------------------------------------
Josu� Jr. <[EMAIL PROTECTED]>
Registered Linux User #225420
Linux Machine #123076
"N�o existe gol feio; feio � n�o fazer gols!"
-Dad� Maravilha-
Powered by Slackware 10.0
--------------------------------------------------
__________________________________________________
Converse com seus amigos em tempo real com o Yahoo! Messenger
http://br.download.yahoo.com/messenger/ Linux version 2.4.20 ([EMAIL PROTECTED]) (gcc version 3.2.2) #2 Mon Mar 17
22:02:15 PST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004010000 (usable)
BIOS-e820: 0000000004010000 - 0000000004020000 (ACPI data)
BIOS-e820: 0000000004020000 - 0000000004040000 (reserved)
BIOS-e820: 00000000fef80000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000ffee6e00 (reserved)
BIOS-e820: 00000000ffee6e00 - 00000000ffee7000 (ACPI NVS)
BIOS-e820: 00000000ffee7000 - 00000000ffef0000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
64MB LOWMEM available.
On node 0 totalpages: 16400
zone(0): 4096 pages.
zone(1): 12304 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=slackware ro root=303
Initializing CPU#0
Detected 299.947 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 598.01 BogoMIPS
Memory: 61820k/65600k available (1733k kernel code, 3392k reserved, 568k data,
112k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After generic, caps: 008001bf 00000000 00000000 00000000
CPU: Common caps: 008001bf 00000000 00000000 00000000
CPU: Intel Mobile Pentium MMX stepping 02
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfd6de, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vesafb: framebuffer at 0xfd000000, mapped to 0xc500d000, size 2048k
vesafb: mode is 800x600x8, linelength=800, pages=0
vesafb: protected mode interface info at c000:9550
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 80, VID=1179, DID=0102
PCI_IDE: chipset revision 51
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DJSA-210, ATA DISK drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0388784, I/O limit 4095Mb (mask 0xffffffff)
hda: 11733120 sectors (6007 MB) w/384KiB Cache, CHS=730/255/63, UDMA(33)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 320.800 MB/sec
32regs : 257.200 MB/sec
pII_mmx : 436.000 MB/sec
p5_mmx : 526.400 MB/sec
raid5: using function: p5_mmx (526.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: checking transaction log (device 03:03) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
Adding Swap: 64256k swap-space (priority -1)
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: No ISAPnP cards found, trying standard ones...
opl3sa2: No PnP cards found
opl3sa2: Search for a card at 0x880.
opl3sa2: chipset version = 0x5
opl3sa2: Found OPL3-SA3 (YMF715E or YMF719E)
opl3sa2: Control I/O port 0x370 not free
opl3sa2: There was a problem probing one of the ISA PNP cards, continuing
opl3sa2: Control I/O port 0x370 not free
opl3sa2: There was a problem probing one of the ISA PNP cards, continuing
opl3sa2: Control I/O port 0x370 not free
opl3sa2: There was a problem probing one of the ISA PNP cards, continuing
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
PCI: No IRQ known for interrupt pin A of device 00:13.0. Please try using
pci=biosirq.
PCI: No IRQ known for interrupt pin B of device 00:13.1. Please try using
pci=biosirq.
Yenta IRQ list 0698, PCI irq0
Socket status: 30000087
Yenta IRQ list 0e98, PCI irq0
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x378-0x37f 0x480-0x48f
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
usb-ohci.c: USB OHCI at membase 0xc5344000, IRQ 11
usb-ohci.c: usb-00:0b.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: $Revision: 1.275 $ time 15:38:38 Mar 11 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
--
GUS-BR - Grupo de Usuarios Slackware - BR
http://www.slackwarebrasil.org/
http://www.linuxmag.com.br/mailman/listinfo/slack-users
