Quero identificar se é um problema do HD ou algo software, a
informação mais próxima que tenho é que pelo código ICRC ABRT de
acordo com o http://ata.wiki.kernel.org/index.php/Libata_error_messages
eu teria um problema de dma ou alimentação, alguém
já teve esse problema e conseguiu resolver ? percebi que muitos
usuários debian e ubuntu passam pelo mesmo problema
mas não encontrei solução ainda.
Linux version 2.6.27.7-smp (r...@midas) (gcc version 4.2.4) #2 SMP Thu
Nov 20 22:32:43 CST 2008
Kernel command line: auto BOOT_IMAGE=Linux ro root=801
vt.default_utf8=1 nopcmcia noapic acpi=off pci=nomsi
libata version 3.00 loaded.
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf0f0-0xf0f7
Probing IDE interface ide0...
hda: TSSTcorp CDDVDW SH-S202J, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: skipping word 93 validity check
hda: UDMA/66 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
GDT-HA: Storage RAID Controller Driver. Version: 3.05
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: found PCI INT B -> IRQ 11
ata_piix 0000:00:1f.2: sharing IRQ 11 with 0000:00:1f.3
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 11
ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 11
ata2.01: ATA-8: WDC WD5000AAJS-22A8B0, 01.03B01, max UDMA/133
ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: found PCI INT B -> IRQ 11
ata_piix 0000:00:1f.2: sharing IRQ 11 with 0000:00:1f.3
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 11
ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 11
ata2.01: ATA-8: WDC WD5000AAJS-22A8B0, 01.03B01, max UDMA/133
ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs: mounted filesystem with ordered data mode.
ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata2.01: BMDMA stat 0x46
ata2.01: cmd 25/00:08:19:aa:1a/00:00:37:00:00/f0 tag 0 dma 4096 in
ata2.01: status: { DRDY ERR }
ata2.01: error: { ICRC ABRT }
ata2: soft resetting link
ata2.01: configured for UDMA/133
ata2: EH complete
ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata2.01: BMDMA stat 0x46
ata2.01: cmd 25/00:00:0f:ca:64/00:01:13:00:00/f0 tag 0 dma 131072 in
ata2.01: status: { DRDY ERR }
ata2.01: error: { ICRC ABRT }
ata2: soft resetting link
ata2.01: configured for UDMA/133
ata2: EH complete
ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata2.01: BMDMA stat 0x46
ata2.01: cmd 25/00:00:77:4e:2b/00:01:13:00:00/f0 tag 0 dma 131072 in
ata2.01: status: { DRDY ERR }
ata2.01: error: { ICRC ABRT }
ata2: soft resetting link
ata2.01: configured for UDMA/133
ata2: EH complete
ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata2.01: BMDMA stat 0x46
ata2.01: cmd 25/00:60:b9:06:6f/00:00:36:00:00/f0 tag 0 dma 49152 in
ata2.01: status: { DRDY ERR }
ata2.01: error: { ICRC ABRT }
ata2: soft resetting link
ata2.01: configured for UDMA/133
ata2: EH complete
##smartmontool##
smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Second Generation Serial ATA family
Device Model: WDC WD5000AAJS-22A8B0
Serial Number: WD-WMASY1464595
Firmware Version: 01.03B01
User Capacity: 500,107,862,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Sep 10 14:46:08 2009 BRT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 131) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 154 152 021 Pre-fail
Always - 5300
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 69
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 051 Old_age
Always - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age
Always - 4828
10 Spin_Retry_Count 0x0032 100 253 051 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 051 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 69
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 37
193 Load_Cycle_Count 0x0032 200 200 000 Old_age
Always - 69
194 Temperature_Celsius 0x0022 106 100 000 Old_age
Always - 41
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 199 000 Old_age
Always - 6421
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
“Nos mesmos pagamos por todas essas coisas, então deus, obrigado por nada”
Bart Simpson
--~--~---------~--~----~------------~-------~--~----~
GUS-BR - Grupo de Usuários de Slackware Brasil
http://www.slackwarebrasil.org/
http://groups.google.com/group/slack-users-br
Antes de perguntar:
http://www.istf.com.br/perguntas/
Para sair da lista envie um e-mail para:
[email protected]
-~----------~----~----~----~------~----~------~--~---
