Que erro da no K3B? É a primeira vez que voce tenta gravar alguma coisa neste teu DVDROM? Foi Instalado agora? Voce consgue gravar em um DVD-R? Teu usuario tem permissao para acesso a este dispositivo no /dev? Tentou gravar com usuario root?
2010/6/23 Andre Andrade <[email protected]> > Olá galera! Venho tentado gravar um dvd-rw no k3b mas sem sucesso. > Consegui gravar em outro dvd-rw normalmente, segue abaixo o debug do > erro. Meu groups: users tty disk dialout audio video cdrom plugdev > burning ppp. > > Abrss > > Devices > ----------------------- > TSSTcorp CDDVDW SH-S223B SB00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, > DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R > Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD- > RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD > +R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/ > R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] > [%7] > > System > ----------------------- > K3b Version: 1.91.0 > KDE Version: 4.4.3 (KDE 4.4.3) > QT Version: 4.6.2 > Kernel: 2.6.33.4-smp > > Used versions > ----------------------- > cdrecord: 2.1.1a78 > > cdrecord > ----------------------- > scsidev: '/dev/sr0' > devname: '/dev/sr0' > scsibus: -2 target: -2 lun: -2 > Warning: Open by 'devname' is unintentional and not supported. > Linux sg driver version: 3.5.27 > SCSI buffer size: 64512 > /usr/bin/cdrecord: Warning: Cannot read drive buffer. > /usr/bin/cdrecord: Warning: The DMA speed test has been skipped. > Cdrecord-ProDVD-ProBD-Clone 2.01.01a78 (i686-pc-linux-gnu) Copyright > (C) 1995-2010 Jörg Schilling > TOC Type: 1 = CD-ROM > Using libscg version 'schily-0.9'. > Driveropts: 'burnfree' > atapi: 1 > Device type : Removable CD-ROM > Version : 5 > Response Format: 2 > Capabilities : > Vendor_info : 'TSSTcorp' > Identifikation : 'CDDVDW SH-S223B ' > Revision : 'SB00' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Current: DVD-RW restricted overwrite > Profile: DVD-R/DL sequential recording > Profile: DVD-R/DL layer jump recording > Profile: DVD+R/DL > Profile: DVD+R > Profile: DVD+RW > Profile: DVD-RW sequential recording > Profile: DVD-RW restricted overwrite (current) > Profile: DVD-RAM > Profile: DVD-R sequential recording > Profile: DVD-ROM > Profile: CD-RW > Profile: CD-R > Profile: CD-ROM > Profile: Removable Disk > Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). > Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE > Supported modes: PACKET SAO LAYER_JUMP > Drive buf size : 1376256 = 1344 KB > FIFO size : 4194304 = 4096 KB > /usr/bin/cdrecord: Drive needs to reload the media to return to proper > status. > Track 01: data 3817 MB > Total size: 3817 MB = 1954570 sectors > Current Secsize: 2048 > Trying to clear drive status. > WARNING: Phys disk size 2297888 differs from rzone size 0! Prerecorded > disk? > WARNING: Phys start: 196608 Phys end 2494495 > WARNING: Drive returns zero media size. Using media size from ADIP. > Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 343318 > Reducing transfer size from 64512 to 32768 bytes. > Starting to write CD/DVD/BD at speed 4 in real SAO mode for single > session. > Last chance to quit, starting real write in 3 seconds. > 2 seconds. > 1 seconds. > 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... /usr/bin/cdrecord: > Input/output error. reserve_track_rzone: scsi sendcmd: no error > CDB: 53 00 00 00 00 00 1D D3 0A 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 05 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x72 Qual 0x05 (no more track reservations allowed) Fru > 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s timeout 200s > /usr/bin/cdrecord: Cannot open next track. > input buffer ready. > BURN-Free is OFF. > Turning BURN-Free on > Writing time: 0.017s > Average write speed 999.0x. > Fixating... > Fixating time: 0.003s > /usr/bin/cdrecord: fifo had 128 puts and 0 gets. > /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill > was 100%. > BURN-Free was not used. > > cdrecord command: > ----------------------- > /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=4 -sao > driveropts=burnfree -data -tsize=1954570s - > > -- > GUS-BR - Grupo de Usuários de Slackware Brasil > http://www.slackwarebrasil.org/ > http://groups.google.com/group/slack-users-br > > Antes de perguntar: > http://www.istf.com.br/perguntas/ > > Para sair da lista envie um e-mail para: > [email protected]<slack-users-br%[email protected]> -- _ []´ °v° Márcio Araújo Lopes /(_)\ Administrador Linux ^ ^ Linux User #381916 aka marujo www.caisnetwork.com.br aMSN/Email: [email protected] Licq: 51190505 Slackware – Keep It Simple and Stupid -- GUS-BR - Grupo de Usuários de Slackware Brasil http://www.slackwarebrasil.org/ http://groups.google.com/group/slack-users-br Antes de perguntar: http://www.istf.com.br/perguntas/ Para sair da lista envie um e-mail para: [email protected]

