> -----Original Message-----
> From: Christopher Browne [mailto:[email protected]]
> Sent: Friday, January 14, 2011 1:05 PM
> To: Brad Littlejohn
> Cc: '[email protected]'
> Subject: Re: [Slony1-general] Changing IP address of Slave database
>
> Brad Littlejohn <[email protected]> writes:
> >
> > Perfect! This just ran great in my testbed! What I needed was:
> >
> > 1. the IP addresses/hostnames (obviously),
> > 2. cluster name/admin conninfo (Preamble),
> > 3. STORE PATH command, and
> > 4. STORE LISTEN command.
> >
> > I'm not sure if #4 is required, but it is working for me. Now
> > I'm ready to move over to trying this on my production servers when
> > the slave server gets installed in our DR facility. And I'll
> > definitely take your advice with using hostnames in production, now
> > that the seed is done. Thanks once again!
>
> The STORE LISTEN part shouldn't be necessary on recent-ish versions of
> Slony. That configuration used to need to get computed by hand, back
> in
> version 1.0, but it's automatically computed on the more recent
> versions, certainly for 1.2.x and 2.0.x.
>
> I didn't see what version you were on; I presume 2.0.x?
Yes. I'm using Slony 2.0.6.
Brad
* This e-mail and any files transmitted with it may contain confidential and/or
privileged information and intended solely for the use of the individual or
entity to whom they are addressed. If you are not the addressee or authorized
to receive this for the addressee, you must not use, copy, disclose, or take
any action based on this message or any information herein. If you have
received this message in error, please advise the sender immediately by reply
e-mail and delete this message.
_______________________________________________
Slony1-general mailing list
[email protected]
http://lists.slony.info/mailman/listinfo/slony1-general
