Hello slony1 community, We’ve recently been testing communication reliability between our cluster nodes. Our config is a simple setup with one provider producing a modest volume of changes (measured in KB/s) consumed by 5 direct subscribers, though these are geographically distributed. The test is just a sync event followed by a wait on the sync originator. Example:
cluster name = ams_cluster; node 5 admin conninfo='dbname=ams host=23.79.242.182 user=ams_slony sslmode=verify-ca sslcert=/usr/local/akamai/.ams_certs/complete-ams_slony.crt sslkey=/usr/local/akamai/.ams_certs/ams_slony.private_key sslrootcert=/usr/local/akamai/etc/ssl_ca/canonical_ca_roots.pem'; node 2 admin conninfo = 'dbname=ams user=ams_slony'; sync(id=2); wait for event (origin=2, confirmed=5, wait on=2, timeout=30); Tests show the script takes 10-20 secs to run on different nodes. Can anyone explain what’s happening internally during this time, and why it takes so long? On a healthy, lightly loaded system, we might have hoped for a sync response in just a couple seconds. Our slon daemons are running with mostly default startup options. Thanks in advance, Tom ☺
_______________________________________________ Slony1-general mailing list Slony1-general@lists.slony.info http://lists.slony.info/mailman/listinfo/slony1-general