U obviously haven't ready the NET-2/3 howtos before rite ?
Elvin
-
On Sat, 28 Aug 1999, Ng Kai Hoe Raymond wrote:
> Moonshi Mohsenruddin -- User wrote:
>
> My God, this is supposed to be MINI!!
>
> > Hi guys,
> >
> > I have just written a Mini-DNS-HOWTO which is applicable as a
> > streamliner for HardwareZone.com site.
> >
> > Elvin >> I need your help to go thru the "named.conf", "named.hosts",
> > "named.local" and "named.rev" file before I post it to the public and on
> > SLP's website.
> >
> > Once you have done that, add your name to it too :)
> >
> > Cheers!
> > Moonshi Mohsenruddin aka MoonX [EMAIL PROTECTED]
> > Asia/Singapore icq:2595480 http://www.linux.com.sg
> >
> > ------------------------------------------------------------------------
> > Mini DNS-Howto
> > ______________
> >
> > By Moonshi Mohsenruddin
> > [EMAIL PROTECTED]
> >
> > Introduction
> > ------------
> >
> > I wrote this simple Mini-DNS-HOWTO for everyone to get their butt up and start
>adding hostsnames and service mappings for their DNS
> > entries in their own network but before you complete reading this material, please
>spend sometime reading the official Linux DNS-HOWTO
> > by Nicolai Langfeldt <[EMAIL PROTECTED]> which is available at
>http://www.linux.com/howto/DNS-HOWTO.html
> >
> > Understanding the DNS entries
> > -----------------------------
> >
> > On Linux, the DNS (Domain Name Service Daemon) used is BIND (Berkeley Internet
>Name Domain) DNS. It is available for download at the
> > Internet Software Consortium (ISC) homepage at http://www.isc.org/. Basically DNS
>is an Internet naming service to map a domain name to
> > IP addresses.
> >
> > Example 1;
> >
> > "domain_name.com" actually points to an IP address "10.2.3.2" and all it's other
>services like "www", "ftp", "smtp" and "pop"
> > are canonical names which could be local or pointing to many other different
>servers that handles the various services.
> >
> > Example 2;
> >
> > "www.domain_name.com" (WWW) points to a different host which has an IP address of
>"10.1.2.3"
> > "ftp.domain_name.com" (FTP) points to a different host which has an IP address of
>"10.1.2.4"
> >
> > ...and the list goes on for SMTP/POP etc etc.
> >
> > So, setting up a DNS daemon is quite simple based on the information that you have
>just read right? Not really! It requires that you
> > have setup your Linux server successfully with an ethernet card, routing tables,
>proper hostnames for each of your servers and Internet
> > assigned IP address (registered with your ISPs).
> >
> > Finally what you need to do now is to register a domain name with Network
>Solutions (previously known as Internic) at
> > http://www.networksolutions.com
> >
> > Nest, be sure to explicitly informed your ISP (Internet Service provider) that you
>are PRIMARY-ing your DNS and get your ISP to
> > SECONDARY your DNS zones. This is to make it easy for your network administrators
>to update the DNS zone entries, adding more
> > services, hosts and etc and getting it to be SECONDARY by your ISP as and when
>your PRIMARY DNS is updated.
> >
> > Once that is done, let's get to the ground up.
> >
> > Setting It Up
> > -------------
> >
> > BIND DNS comes with most major Linux distributions like SuSE 6.x, Redhat 6.x,
>Caldera 2.x, Debian 3.x and many other distributions.
> > Firstly, make sure that you have the latest BIND DNS software as there are many
>exploits that have been discovered on previous
> > versions.
> >
> > I will be using BIND DNS version 4.9.x to explain the setting up of BIND DNS and
>make sure you are "root" while you are doing this.
> >
> > The "named.conf" file
> > ---------------------
> >
> > On Linux, most of the configuration files are named with a suffix of ".conf" and
>BIND DNS's will read this file from "/etc/named.conf"
> > by default IF it is installed.
> >
> > # Example of "/etc/named.conf"
> >
> > options {
> > directory "/var/named";
> > /*
> > * If there is a firewall between you and nameservers you want
> > * to talk to, you might need to uncomment the query-source
> > * directive below. Previous versions of BIND always asked
> > * questions using port 53, but BIND 8.1 uses an unprivileged
> > * port by default.
> > */
> > // query-source address * port 53;
> >
> > };
> >
> > zone "." {
> > type hint;
> > file "named.ca";
> > };
> >
> > zone "0.0.127.in-addr.arpa" {
> > type master;
> > file "named.local";
> > };
> >
> > zone "3.2.10.in-addr.arpa" {
> > type master;
> > file "named.rev";
> > };
> >
> > zone "domain_name.com" {
> > type master;
> > file "named.hosts";
> > allow-transfer { ip_addr_of_secondary_dns ;};
> > allow-update { ip_addr_of_secondary_dns ;};
> > };
> >
> > zone "virtual_domain_hosting.com" {
> > type master;
> > file "virtual_domain";
> > };
> >
> > # End of "/etc/named.conf file--
> >
> > Based on the "/etc/named.conf" file above, "zone . " is pointing to
>"/var/named/named.ca" file, "zone 0.0.127.in-addr.arpa"
> > (localhost file) is pointing to "/var/named/named.local", "zone
>3.2.10.in-addr.arpa" is pointing to "/var/named/named.rev"
> > (reverse lookup file), "zone domain_name.com" is pointing to
>"/var/named/named.hosts" file (all your IPs that is hosting
> > services/daemons for this domain name goes in here) and "zone
>virtual_domain_hosting.com" goes into "/var/named/virtual_domain".
> >
> > The "named.hosts" file
> > ----------------------
> >
> > # Example of "/var/named/named.hosts" file.
> >
> > @ IN SOA hostname_of_DNS_Server.domain_name.com.
>postmaster.domain_name.com. (
> > 1999010101 ; Serial (YYYYMMDDSerialNo)
> > 28800 ; Refresh
> > 14400 ; Retry
> > 3600000 ; Expire
> > 86400 ; Minimum
> > )
> >
> > IN NS hostname_of_primary_dns_server.domain_name.com.
> > IN NS hostname_of_secondary_dns_server.domain_name.com.
> >
> > IN MX 10 mail.domain_name.com.
> >
> > localhost IN A 127.0.0.1
> > router IN A 10.1.2.1
> > dns_server_hostname IN A 10.1.2.2
> > mailserver_hostname IN A 10.1.2.3
> > www_server_hostname IN A 10.1.2.4
> > domain_name.com. IN A 10.1.2.2
> >
> > www IN CNAME www_server_hostname ;(as pointed above IN A 10.1.2.4)
> > ftp IN CNAME ftp_server_hostname
> > pop IN CNAME mail_server_hostname
> > smtp IN CNAME mail_server_hostname
> > mail IN CNAME mail_server_hostname
> >
> > # End of "/var/named/named.hosts" file.
> >
> > The "named.local" file.
> > ----------------------
> >
> > Since BIND DNS needs to point to a localhost for loopback and reverse lookups, we
>need to add an entry for the ethernet device
> > interface loopback.
> >
> > This is the example of the file.
> >
> > # Example of "/var/named/named.local" file.
> >
> > @ IN SOA hostname_of_dns_server.domain_name.com.
>postmaster.domain_name.com. (
> > 1999010101 ; Serial
> > 28800 ; Refresh
> > 14400 ; Retry
> > 3600000 ; Expire
> > 86400 ) ; Minimum
> >
> > IN NS dns_server_hostname.domain_name.com.
> > 1 IN PTR localhost.
> >
> > # End of "/var/named/named.local" file.
> >
> > The "/var/named/named.rev" file.
> > -------------------------------
> >
> > Now that we have the "named.hosts", "named.local" file up, we need to make sure
>that a reverse-lookup file exists.
> >
> > All the "IN PTR" entries here points to a host(name) which has "IN A" entries in
>"/var/named/named.hosts" file for reverse lookups and
> > the "numbers" used here are the suffix IP addresses given by your ISP.
> >
> > Example;
> >
> > IP Address = 10.1.2.2
> > Service = DNS Server
> >
> > as such, in the "/var/named/named.rev" file only the suffix IP which is "2" is
>used.
> >
> > # Example of "/var/named/named.rev" file.
> >
> > @ IN SOA domain_name.com. postmaster.domain_name.com. (
> > 1999010101 ; Serial (Change!)
> > 28800 ; Refresh
> > 14400 ; Retry
> > 3600000 ; Expire
> > 86400 ; Minimum
> > )
> >
> > IN NS primary_dns_server_hostname.domain_name.com.
> > IN NS secondary_dns_server_hostname.domain.com.
> >
> > 2 IN PTR domain_name.com.
> > 2 IN PTR dns_server_hostname.domain.com.
> > 3 IN PTR mail.domain_name.com.
> > 3 IN PTR smtp.domain_name.com.
> > 3 IN PTR pop.domain_name.com.
> > 4 IN PTR www.domain_name.com.
> > 5 IN PTR ftp.domain_name.com.
> >
> > # End of "/var/named/named.rev" file.
> >
> > Starting it.
> > -----------
> >
> > Well, that's all folks. These are the only files and configurations needed to run
>BIND DNS quickly. Once you have followed all the
> > above, just make sure you START the daemon/service!
> >
> > As user "root", type this on console.
> >
> > "ndc start" (without the quotes please!)
> >
> > Once it is started, type;
> >
> > "ps ax | grep named" to make sure that the "named" (BIND DNS) service is running.
> >
> > Next, view the logfiles to see if there are any errors. Type;
> >
> > "tail -n 50 /var/log/messages" and scroll the last 50 lines to see what the
>logfile have to say.
> >
> > Finally, use "nslookup" to check your DNS zones.
> >
> > Type;
> >
> > "nslookup"
> >
> > "set domain=your_domain_name.com"
> >
> > then type;
> >
> > "your_domain_name.com"
> >
> > and you should see some information like this.
> >
> > # My "nslookup" example.
> > # ---------------------
> >
> > moonshi@firewire:~ > nslookup
> > Default Server: ns1.singa.pore.net
> > Address: 202.169.225.80
> >
> > # Then I do a "set domain" query to my domain name.
> >
> > > set domain=singa.pore.net
> >
> > # Followed by a "set query=any"
> >
> > > set q=any
> >
> > # and then I list the domain simply by typing the full domain name.
> >
> > > singa.pore.net
> >
> > # This is the query reply.
> >
> > Server: ns1.singa.pore.net
> > Address: 202.169.225.80
> >
> > >
> >
> > # to exit the "nslookup", type "exit".
> >
> > > exit
> >
> > # and you will get your usual prompt.
> >
> > moonshi@firewire:~ >
> >
> > # That's all.
> >
> > That's all folks. This is a very straight-forward Mini-DNS-HOWTO and once you get
>it up and running, I recommend that you read the
> > DNS-HOWTO which I pointed earlier in this Mini-DNS-HOWTO introduction.
> >
> > I hope all of you whom are setting-up DNS and need to set it up fast will find
>this information helpful. However, I hold no
> > responsibility if you follow my examples and still can't get it up to run.
> >
> > Pls send all emails to me IF needed at
> > To: <[EMAIL PROTECTED]>
> > Subject: Mini-DNS-HOWTO
> >
> > Thank you!
>
> --
> -------------------------------------------------------------
> Ng Kai Hoe Raymond Pager : 92279944 ICQ UIN : 4878260
> Editor, Singapore Linux Portal http://linux.com.sg
> Email : [EMAIL PROTECTED] / [EMAIL PROTECTED]
> PGP Public Key : http://members.tripod.com/~ngkaihoe/ngkaihoe.txt
>
> 'This has given me the greatest trouble and still does: to realize
> that what things are called is incomparably more important than what
> they are.'
> - Friedrich Wilhelm Nietzsche, "The Gay Science"
>
>
>
