On Tue, 25 Jan 2000 19:14:33 +1100
Scott Howard <[EMAIL PROTECTED]> wrote:
> Are you sure your provider is routing these addresses to you?
The Telstra routing page tells me that my routing is
203.41.215.160/27
Which tallies with the fact that I can be reached at
203.41.215.171 which is my ppp0 interface
However nothing on any of my other addresses.
Where to now?
Peter
>
> If you're not seeing anything with a TCP dump then this most likely means
> the routing is wrong at your ISPs end and the packets aren't getting to you.
>
> Scott.
>
>
> On Tue, Jan 25, 2000 at 06:41:21PM +1100, Peter Vogel wrote:
> > I am not running a firewall.
> >
> > I tried your tcpdump suggestion and nothing comes in. Does this
> > utilityv work before the routing, that is, will it show any incoming
> > traffic even if I've got the routing wrong? (I know, two wrongs don't
> > make a route).
> >
> > Can anyone else suggest what I've got wrong?
> >
> > Thanks
> >
> > Peter
> >
> > Mon, Jan 24, 2000 at 08:14:36PM +1100, Peter Vogel wrote:
> > > I am trying to get virtual hosts running on my Linux box. I have
> > > managed to get it all working from my LAN, however I'm told that the
> > > virtual hosts are not accessible from the outside world.
> > >
> > > I thought maybe I need a static route at my end, so I added
> > > route add -host 203.41.215.165 dev eth0:2
> > >
> > > (203.41.215.165 is the address of one of my virtual hosts, I've also got
> > > 203.41.215.163 and 203.41.215.164 although no route for these yet)
> >
> >
> >
> > On Tue, 25 Jan 2000 16:45:37 +1100
> > chesty <[EMAIL PROTECTED]> wrote:
> >
> > > On Tue, Jan 25, 2000 at 03:43:15PM +1100, Peter Vogel wrote:
> > > > On Tue, 25 Jan 2000 15:29:42 +1100
> > > > chesty <[EMAIL PROTECTED]> wrote:
> > > > > It may help if you post your routing table.
> > > >
> > > > Here it is:
> > > >
> > > > Kernel IP routing table
> > > > Destination Gateway Genmask Flags Metric Ref Use Iface
> > > > 139.130.45.65 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
> > > > 203.41.215.165 0.0.0.0 255.255.255.255 UH 0 0 0 eth0:2
> > > > 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 82 eth0
> > > > 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 2 lo
> > > > 0.0.0.0 139.130.45.65 0.0.0.0 UG 0 0 1196 ppp0
> > > >
> > > > Does it look bad, doctor?
> > >
> > > I don't really know, but I'll have a few guesses.
> > > (and hope someone else will take over)
> > >
> > > What happens if you put 203.41.215.165 on ppp0:2 ?
> > >
> > > Do you have any firewall/masq rules? They might be blocking
> > > relevant traffic. Try turning on logging to see what traffic
> > > is being denied.
> > > Is ip forwarding turned on?
> > >
> > > Try doing a "tcpdump host 203.41.215.165 -i ppp0" and then go to
> > > http://www.satori.net.au/troute.htm and do a few trace routes to
> > > 203.41.215.165. If you see the packets coming in, the problem is
> > > probably at your end, if you don't see them, the problem might be
> > > with your isp.
> > >
> > >
> > >
> > > --
> > > chesty
> >
> > --
> > SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
> > To unsubscribe send email to [EMAIL PROTECTED] with
> > unsubscribe in the text
> --
> SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
> To unsubscribe send email to [EMAIL PROTECTED] with
> unsubscribe in the text
--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to [EMAIL PROTECTED] with
unsubscribe in the text
