>From: [EMAIL PROTECTED]
>I just found out my UPS shutdown my machines due to a power outage. But my
>biggest problem is, I have a BX board on a ATX case, and of course when the
>power came back, it didn't. So can anyone tell me how one gets an ATX case to
>remember it was turned on, so when power comes back it comes back also.
Most decent BX boards have a setting in the BIOS to autostart up the box
after power loss. Some boards use a jumper on the motherboard. Check
out the manual or go into the BIOS to have a look.
Rgds
Len
--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to [EMAIL PROTECTED] with
unsubscribe in the text
