Hi All.
I have five machines of a 10BaseT HUB. Two machines have 100/10BaseT
cards, the others have either ISA or PCI 10BaseT cards. I am running
kernel 2.2.14.
I have checked all cables with the specific cable tester, and
exchanged the HUB with the same model but still the same problem
remains.
Transferring 200MB of ftp data from/to 100/10BaseT machines - NO
problems or errors are indicated by ifconfig.
If however I try to xfer anything greater than ~20KB from/to either
the 10BaseT machines or from/to the 100/10BaseT machines I get (from
the transmitting machine) the following CARRIER errors:
eth0 Link encap:Ethernet HWaddr 00:00:E8:89:C2:AC
inet addr:10.10.10.1 Bcast:10.10.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:71302 errors:0 dropped:0 overruns:0 frame:0
TX packets:105654 errors:602 dropped:0 overruns:0 carrier:602
collisions:32703 txqueuelen:100
Interrupt:18 Base address:0x8100
on the otherhand the recieving machine gets corresponding FRAME
errors.
Can anyone offer a clue what is going on? I thought the two
100/10BaseT cards would default to the speed of the HUB.
Thanks Grahame.
-- SLUG (Sydney Linux User Group) www.slug.org.au
--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to [EMAIL PROTECTED] with
unsubscribe in the text
