Netcomm Roadster 11 64k usb AM5050 R3 FirmwareV1.55
Suse 6.4 kernel 2.2.16 backport patch
usb-2.4.0-test2-pre2-for-2.2.16-v3.diff
This modem is on the working device list at linux-usb.org. Has anyone at
Slug configured one? Has this been covered in Slug before ?
In the following I load the modules acm, (modprobe calls up usbcore by
itself) and usb-uhci. I then mount usbdevfs and look at the result. The
log below shows the kernel responses. The connection timed out.
Something seems to be missing -any help appreciated.
I have studied notes and material at usb.org.
Methinks I need to look at a recent kernel.
Brian Marr
root@Gomez:/home/bombay > modprobe acm
root@Gomez:/home/bombay > lsmod
Module Size Used by
acm 6324 0 (unused)
usbcore 48008 0 [acm]
vmnet 16352 3
vmmon 18048 0 (unused)
ne2k-pci 4232 1 (autoclean)
8390 6676 0 (autoclean) [ne2k-pci]
parport_pc 7588 0 (unused)
parport 7884 0 [parport_pc]
vfat 9308 1 (autoclean)
fat 30080 1 (autoclean) [vfat]
root@Gomez:/home/bombay > modprobe uhci-usb
modprobe: Can't locate module uhci-usb
root@Gomez:/home/bombay > modprobe usb-uhci
root@Gomez:/home/bombay > cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: No such file or directory
root@Gomez:/home/bombay > mount -t usbdevfs usb /proc/bus/usb
root@Gomez:/home/bombay > cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
root@Gomez:/home/bombay > lsmod
Module Size Used by
lp 5636 1 (autoclean)
usb-uhci 22272 0 (unused)
acm 6324 0 (unused)
usbcore 48008 0 [usb-uhci acm]
vmnet 16352 4
vmmon 18048 3
ne2k-pci 4232 1 (autoclean)
8390 6676 0 (autoclean) [ne2k-pci]
parport_pc 7588 1
parport 7884 1 [lp parport_pc]
vfat 9308 1 (autoclean)
fat 30080 1 (autoclean) [vfat]
Aug 20 10:23:46 Gomez kernel: usb.c: registered new driver usbdevfs
Aug 20 10:23:46 Gomez kernel: usb.c: registered new driver hub
Aug 20 10:23:46 Gomez kernel: usb.c: registered new driver acm
Aug 20 10:24:54 Gomez kernel: usb-uhci.c: $Revision: 1.232 $ time
09:21:15 Aug 20 2000
Aug 20 10:24:54 Gomez kernel: usb-uhci.c: High bandwidth mode enabled
Aug 20 10:24:54 Gomez kernel: usb-uhci.c: Intel USB controller: setting
latency timer to 0
Aug 20 10:24:54 Gomez kernel: usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 12
Aug 20 10:24:54 Gomez kernel: usb-uhci.c: Detected 2 ports
Aug 20 10:24:54 Gomez kernel: usb.c: new USB bus registered, assigned
bus number 1
Aug 20 10:24:54 Gomez kernel: usb.c: USB new device connect, assigned
device number 1
Aug 20 10:24:54 Gomez kernel: usb.c: kmalloc IF c6a47c80, numif 1
Aug 20 10:24:54 Gomez kernel: usb.c: new device strings: Mfr=0,
Product=2, SerialNumber=1
Aug 20 10:24:54 Gomez kernel: usb.c: USB device number 1 default
language ID 0x0
Aug 20 10:24:54 Gomez kernel: Product: USB UHCI Root Hub
Aug 20 10:24:54 Gomez kernel: SerialNumber: e000
Aug 20 10:24:54 Gomez kernel: hub.c: USB hub found
Aug 20 10:24:54 Gomez kernel: hub.c: 2 ports detected
Aug 20 10:24:54 Gomez kernel: hub.c: ganged power switching
Aug 20 10:24:54 Gomez kernel: hub.c: standalone hub
Aug 20 10:24:54 Gomez kernel: hub.c: global over-current protection
Aug 20 10:24:54 Gomez kernel: hub.c: power on to power good time: 2ms
Aug 20 10:24:54 Gomez kernel: hub.c: hub controller current requirement:
0mA
Aug 20 10:24:54 Gomez kernel: hub.c: port 1 is removable
Aug 20 10:24:54 Gomez kernel: hub.c: port 2 is removable
Aug 20 10:24:54 Gomez kernel: hub.c: local power source is good
Aug 20 10:24:54 Gomez kernel: hub.c: no over-current condition exists
Aug 20 10:24:54 Gomez kernel: hub.c: enabling power on all ports
Aug 20 10:24:54 Gomez kernel: usb.c: hub driver claimed interface
c6a47c80
Aug 20 10:24:54 Gomez kernel: hub.c: port 1 connection change
Aug 20 10:24:55 Gomez kernel: hub.c: portstatus 101, change 1, 12 Mb/s
Aug 20 10:24:55 Gomez kernel: hub.c: portstatus 103, change 0, 12 Mb/s
Aug 20 10:24:55 Gomez kernel: usb.c: USB new device connect, assigned
device number 2
Aug 20 10:24:58 Gomez kernel: usb_control/bulk_msg: timeout
Aug 20 10:24:58 Gomez kernel: usb.c: USB device not accepting new
address (error=-110)
Aug 20 10:24:58 Gomez kernel: usb.c: USB new device connect, assigned
device number -1
Aug 20 10:25:01 Gomez kernel: usb_control/bulk_msg: timeout
Aug 20 10:25:01 Gomez kernel: usb.c: USB device not accepting new
address (error=-110)
Aug 20 10:25:01 Gomez kernel: usb.c: USB disconnect on device -1
Aug 20 10:25:01 Gomez kernel: hub.c: hub: disabling port
1
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
