Aargh!
There is no config for 2.2.17 to copy, because that was installed as a debian package as part of the initial install I cant use make menuconfig, because it complains curses is not installed (but it is!) I cant use make xconfig, because I dont have a funtional x windows install I can't be the only person using debian 2.4.12 who needs scsi - there must be a debian package for it somewhere! Please help before I'm forced to go through make config... - Doug > -----Original Message----- > From: George Vieira [mailto:[EMAIL PROTECTED]] > Sent: Thursday, 15 November 2001 1:39 PM > To: 'Doug Stalker' > Subject: RE: [SLUG] SCSi card disappeared after upgrade to 2.4 > > > AAaahaaaaaa!! you haven't compiled the modules for it.. > > Can you still boot back into 2.2.17? If you can then do this > > cd /usr/src/linux > make menuconfig > (Exit and Save it). > > Reboot into 2.4 kernel > cd /usr/src/linux > make oldconfig > > and this will compile all the modules that were compiled in the > 2.2.17 setup > > otherwise you'll have to manually go through and add them in and > recompile..... > > > thanks, > George Vieira > Network Engineer > Citadel Computer Systems P/L > > > > -----Original Message----- > From: Doug Stalker [mailto:[EMAIL PROTECTED]] > Sent: Thursday, November 15, 2001 2:28 PM > To: George Vieira > Subject: RE: [SLUG] SCSi card disappeared after upgrade to 2.4 > > > The problem is I'm not sure what modules to install - I didn't need to > manually install anything under 2.2.17 - and there is no /scsi > subdirectory > in the lib/modules/2.4.12 directory. > > - Doug > > > > -----Original Message----- > > From: George Vieira [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, 15 November 2001 12:55 PM > > To: 'Doug Stalker' > > Subject: RE: [SLUG] SCSi card disappeared after upgrade to 2.4 > > > > > > have you tried a insmod or modprobe for the device... do you have > > `kudzu` on > > your machine (this might be RH only, not sure).. > > > > > > > > thanks, > > George Vieira > > Network Engineer > > Citadel Computer Systems P/L > > > > > > > > -----Original Message----- > > From: Doug Stalker [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, November 15, 2001 1:55 PM > > To: Slug > > Subject: [SLUG] SCSi card disappeared after upgrade to 2.4 > > > > > > > > I recently moved a debian system from kernel 2.2.17 to 2.4.12. > Everything > > is working fine (once I changes ipchains to iptables) except > that the SCSI > > card doesn't work anymore. It's a cheap ACARD scsi adapter, with a CD > > burner and a DDS3 tape drive runing off it that was working fine under > > 2.2.17 (I just shut down the system, plugged it in, powered it > > back up and > > it worked perfectly) > > > > Now any command that involves /dev/st0 or /dev/scd0 comes up > with no such > > device. > > > > There is a scsi directory in /lib/modules/2.2.17/, but not in > > /lib/modules/2.4.12/. Is there an extra package I need to > install to get > > scsi support under 2.4? > > > > - Doug > > > > > > > > -- > > SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/ > > More Info: http://lists.slug.org.au/listinfo/slug > > > -- SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
