I've just found and started reading this in my kernel source: Documentation/networking/bonding.txt
Looks like it could be quite helpful. Any pointers to other doco or
helpful tips are still most welcome :)
On Fri, 2002-12-06 at 16:56, Craige McWhirter wrote:
> I'm trying to bond two ethernet ports together and have the setup all
> but working. My real stumbling block appears to be my inability to
> locate decent documentation on performing this feat.
>
> Does anyone know where I can find some doco on setting up ethernet port
> trunking (or etherchannel bonding). Google isn't returning results of
> any use (perhaps I'm asking the wrong question?). The LDP also comes up
> dry.
>
> For the curious, I've done the following:
>
> - configured a server trunk using two ports on a Foundry Fastiron II
>
> - trunking setup has been saved and enabled ("deployed" in Foundry's
> preferrred terms)
>
> - loaded the bonding kernel driver
>
> - Plugged both eth0/1 from the server into said ports on the switch
>
> - Created bond0
>
> - ran ifenslave on eth0/1 and they are set to slave
>
> - Default route is via bond0
>
> While links lights are on, I cannot communicate with the outside network
> in anyway. I've got a gut feeling there's on magical step that's
> missing.
>
> Any clue bats?
>
> --
>
> Cheers,
> Craige.
>
> GPG Key fingerprint = C206 904F 5231 2F2E 8DAA F094 5879 71B5 0960 CF37
>
> http://arseclown.tv/
--
Cheers,
Craige.
GPG Key fingerprint = C206 904F 5231 2F2E 8DAA F094 5879 71B5 0960 CF37
http://arseclown.tv/
signature.asc
Description: This is a digitally signed message part
