I know we have a few dedicated Internode users so I was hoping someone would help me to join this exclusive club. My account was just activated, but I can't get in!
I'm using dedicated box running Smootwall 1.0. Modem is D-Link 300, provided and pre-configured by Internode. Modem seems to grab the connection just fine; all lights are green (status light blinking green). But when I try to connect, here's what I get in pppd logs: 07:32:39 pppd pppd 2.3.11 started by nobody, uid 99 07:32:39 pppd Using interface ppp0 07:32:39 pppd Connect: ppp0 <--> /dev/ttyp0 07:32:40 pppoe PPP session is 5601 07:32:41 pppd Remote message: Request Denied 07:32:41 pppd CHAP authentication failed 07:32:41 pppd Connection terminated. 07:32:41 pppoe read (asyncReadFromPPP): Input/output error 07:32:41 pppoe Sent PADT 07:32:41 pppd Exit. I set up Smoothwall myself and not being much of an expert, I was kind of fumbling in the dark... this is what I've got: Red Interface is Eth1. In setup program, networking part, I've got the following for Red: PPPoE for type, Smoothwall for DHCP name, adresses and mask left at default values of 0.0.0.0 In "DNS settings" I entered values provided by Internode; 192.231.203.132 for primary and 192.231.203.3 for secondary. "Default gateway" the same as primary. PPP settings, those set up through Smoothwall's web interface: PPPoE for interface, [EMAIL PROTECTED] for username, "PAP or CHAP" for method and "automatic" for DNS. There are also entries for "Additional PPPoE settings" that worry me a bit: "Service name" and "concentrator name". I left them both blank, since I've no idea what they are! I would greatly appreciate any help! --------------------------------------------------------------------- "Freedom of the press is guaranteed only to those who own one." -- A.J Liebling, media critic -- 17:11:53 up 4 days, 23:05, 2 users, load average: 0.19, 0.07, 0.17-- -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug