On Tue, Mar 03, 2009 at 10:55:27PM +1100, Robert Barnett wrote: > > Just for fun, I'm setting up a FC10 machine with as an IPv6 router. > The tunnel device (tun0) is automatically created using a script (aiccu)
is this a 6to4 sit or are you using a tunnel broker ? You can use ip -6 r g ipv6.google.com or ping6 ping6 ipv6.google.com PING ipv6.google.com(2001:4860:c003::68) 56 data bytes 64 bytes from 2001:4860:c003::68: icmp_seq=1 ttl=60 time=387 ms i use 6to4 addressing because I have a static ipv4 adsl address ip -6 r ::/96 via :: dev ppp06to4 metric 256 mtu 1440 advmss 1380 hoplimit 4294967295 unreachable 2002:3cf1:f856:8::1 dev lo proto kernel metric 256 error -128 mtu 16436 advmss 16376 hoplimit 4294967295 2002:3cf1:f856:11::/64 dev eth0.0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 2002::/16 dev ppp06to4 proto kernel metric 256 mtu 1440 advmss 1380 hoplimit 4294967295 2000::/3 via ::192.88.99.1 dev ppp06to4 metric 10 mtu 1440 advmss 1380 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0.0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0.1 proto kernel metric 256 mtu 1460 advmss 1400 hoplimit 4294967295 fe80::/64 dev ppp06to4 proto kernel metric 256 mtu 1440 advmss 1380 hoplimit 4294967295 unreachable fe80::/64 dev lo proto kernel metric 256 error -128 mtu 16436 advmss 16376 hoplimit 4294967295 fe80::/64 dev wlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 6to4 addresses are inthe 2002::/16 space ifconfig ppp06to4 ppp06to4 Link encap:IPv6-in-IPv4 inet6 addr: 2002:3cf1:f856::1/16 Scope:Global inet6 addr: ::60.241.248.86/128 Scope:Compat UP RUNNING NOARP MTU:1440 Metric:1 RX packets:9712 errors:0 dropped:0 overruns:0 frame:0 TX packets:13236 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2045103 (1.9 MiB) TX bytes:1264034 (1.2 MiB) i create it with $IP tunnel add $TUNNAME mode sit ttl 32 remote any local $IPV4ADDR if you are using a broker then it will setup the interface > I want to allow other machines to use this box as a gateway, but I think > I have the config wrong > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 100 > inet6 2001:1938:83:52::3/64 scope global > valid_lft forever preferred_lft forever > inet6 fe80::20d:57ff:fd9b:4b24/64 scope link > valid_lft forever preferred_lft forever > 40: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1280 qlen 500 > inet6 2001:1938:83:52::2/64 scope global > valid_lft forever preferred_lft forever > inet6 fe80::1838:83:52:2/64 scope link > valid_lft forever preferred_lft forever > > 2001:1938:83:52::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss > 1440 hoplimit 4294967295 > 2001:1938:83:52::/64 dev tun0 proto kernel metric 256 mtu 1280 advmss > 1220 hoplimit 4294967295 > fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 > hoplimit 4294967295 > fe80::/64 dev tun0 proto kernel metric 256 mtu 1280 advmss 1220 > hoplimit 4294967295 > default via 2001:1938:83:52::1 dev tun0 metric 1024 mtu 1280 advmss > 1220 hoplimit 4294967295 > > I have radvd running and everything works well on the LAN using the > stateless addresses. > > -- > > I've tried many combinations of a few things to solve the problem > > turning off /etc/init.d/iptables > > turning off /etc/init.d/ip6tables > > sysctl -w net.ipv6.conf.default.forwarding=1 > > sysctl -w net.ipv6.conf.all.forwarding=1 > > Restricting prefix of tun0 > # /sbin/ip -6 addr del 2001:1938:83:52::2/64 dev tun0 > # /sbin/ip -6 addr add 2001:1938:83:52::2/126 dev tun0 > > Changing the global ip on eth0 to the same as tun0 > > Any thoughts? > > Thanks > > Robbie Barnett > > rob...@barnett.id.au > 0431864709 > Skype Name: retsil42 > > -- > SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ > Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html > -- "I glance at the headlines just to kind of get a flavor for what's moving. I rarely read the stories, and get briefed by people who are probably read the news themselves." - George W. Bush 09/21/2003 Washington, DC
signature.asc
Description: Digital signature
-- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html