Re: [Slugnet] bnx2 on CentOS 5 Final 64bit

[marc pascual]

----- Original Message ----
> From: Marvin Pascual <mar...@pascual.com.ph>
> To: slugnet@lugs.org.sg
> Sent: Thu, October 29, 2009 1:23:14 PM
> Subject: [Slugnet] bnx2 on CentOS 5 Final 64bit
> 
> Hello all,
> 
> I'm not sure what is wrong with my gigabit interfaces. I noticed that
> it keeps on flapping. I tried searching the web for a similar problem
> and/or possible fix on the bnx2 driver but with no luck.
> 
> Has anyone encountered this problem? Kindly check below for more information.
> 
> Regards,
> 
> Marvin
> 
> # cat /etc/redhat-release
> CentOS release 5 (Final)
> 
> # uname -r
> 2.6.18-53.1.21.el5
> 
> # uptime
> 13:14:45 up 297 days, 11:26,  2 users,  load average: 0.65, 0.50, 0.55
> 
> # lspci | grep BCM5708
> 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
> Gigabit Ethernet (rev 12)
> 07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
> Gigabit Ethernet (rev 12)
> 
> # cat /proc/net/bonding/bond0
> Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007)
> 
> Bonding Mode: IEEE 802.3ad Dynamic link aggregation
> Transmit Hash Policy: layer2 (0)
> MII Status: up
> MII Polling Interval (ms): 100
> Up Delay (ms): 0
> Down Delay (ms): 0
> 
> 802.3ad info
> LACP rate: slow
> Active Aggregator Info:
>         Aggregator ID: 1
>         Number of ports: 2
>         Actor Key: 17
>         Partner Key: 22
>         Partner Mac Address: 00:1f:12:8a:af:c0
> 
> Slave Interface: eth0
> MII Status: up
> Link Failure Count: 86
> Permanent HW addr: 00:1e:c9:cd:e5:db
> Aggregator ID: 1
> 
> Slave Interface: eth1
> MII Status: up
> Link Failure Count: 184
> Permanent HW addr: 00:1e:c9:cd:e5:dd
> Aggregator ID: 1
> 
> # dmesg | grep eth | more
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth1 NIC Link is Down
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth1 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth1, disabling it
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth1.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> bnx2: eth0 NIC Link is Down
> bonding: bond0: link status definitely down for interface eth0, disabling it
> bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
> bonding: bond0: link status definitely up for interface eth0.
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> device eth0 entered promiscuous mode
> device eth1 entered promiscuous mode
> device eth0 left promiscuous mode
> device eth1 left promiscuous mode
> 
> # while true; do ethtool -S eth0 | grep disc; ethtool -S eth1 | grep
> disc; echo "---------"; sleep 10; done;
>      rx_discards: 0
>      rx_fw_discards: 195023
>      rx_discards: 0
>      rx_fw_discards: 220795
> ---------
>      rx_discards: 0
>      rx_fw_discards: 195023
>      rx_discards: 0
>      rx_fw_discards: 220795
> ---------
>      rx_discards: 0
>      rx_fw_discards: 195169
>      rx_discards: 0
>      rx_fw_discards: 220823
> ---------
>      rx_discards: 0
>      rx_fw_discards: 195169
>      rx_discards: 0
>      rx_fw_discards: 220823
> 
> _______________________________________________
> LUGS Mailing list - slugnet@lugs.org.sg
> List FAQ: http://wiki.lugs.org.sg/LugsMailingListFaq
> Info page: http://www.lugs.org.sg/mailman/listinfo/slugnet
> To unsubscribe send an empty email to: slugnet-unsubscr...@lugs.org.sg

hi Marvin,

does your switch setting match with your nic setting? e.g. autoneg/speed/duplex

Marc



      

_______________________________________________
LUGS Mailing list - slugnet@lugs.org.sg
List FAQ: http://wiki.lugs.org.sg/LugsMailingListFaq
Info page: http://www.lugs.org.sg/mailman/listinfo/slugnet
To unsubscribe send an empty email to: slugnet-unsubscr...@lugs.org.sg