[slurm-dev] Re: Partition QoS

[Paul Edmon]

Thanks for the insight.  I will try it out on my end.

-Paul Edmon-

On 11/11/2015 3:31 AM, Dennis Mungai wrote:

Re: [slurm-dev] Re: Partition QoS

Thanks a lot, James. Helped a bunch ;-)

*From:*James Oguya [mailto:oguyaja...@gmail.com]
*Sent:* Wednesday, November 11, 2015 11:21 AM
*To:* slurm-dev <slurm-dev@schedmd.com>
*Subject:* [slurm-dev] Re: Partition QoS

I was able to do this on slurm 15.08.3 on a test environment. Here are my notes:

- create qos

sacctmgr add qos Name=vip MaxJobsPerUser=5 MaxSubmitJobsPerUser=5 MaxTRESPerUser=cpu=128

- create partition in slurm.conf

PartitionName=batch Nodes=compute[01-05] AllowQOS=vip Default=NO MaxTime=UNLIMITED State=UP

I believe the keyword here is to specify the QoS name when creating the partition, for my case, I used AllowQOS=vip

James

On Wed, Nov 11, 2015 at 4:16 AM, Danny Auble <d...@schedmd.com <mailto:d...@schedmd.com>> wrote:

    I'm guessing you also added the qos to your partition line in your
    slurm.conf as well.

    On November 10, 2015 5:08:24 PM PST, Paul Edmon
    <ped...@cfa.harvard.edu <mailto:ped...@cfa.harvard.edu>> wrote:

        I did that but it didn't pick it up.  I must need to
        reconfigure again after I made the qos.  I will have to try it
        again.  Let you know how it goes.

        -Paul Edmon-

        On 11/10/2015 5:40 PM, Douglas Jacobsen wrote:

            Hi Paul,

            I did this by creating the qos, e.g. sacctmgr create qos
            part_whatever

            Then in slurm.conf setting qos=part_whatever in the
            "whatever" partition definition.

            scontrol reconfigure

            finally, set the limits on the qos:

            sacctmgr modify qos set MaxJobsPerUser=5 where
            name=part_whatever

            ...

            -Doug


            ----

            Doug Jacobsen, Ph.D.

            NERSC Computer Systems Engineer

            National Energy Research Scientific Computing Center
            <http://www.nersc.gov>

            ------------- __o
            ---------- _ '\<,_
            ----------(_)/  (_)__________________________

            On Tue, Nov 10, 2015 at 2:29 PM, Paul Edmon
            <ped...@cfa.harvard.edu <mailto:ped...@cfa.harvard.edu>>
            wrote:


                In 15.08 you are able to set QoS limits directly on a

partition. So how do you actually accomplish this? I've tried a couple of ways, but no luck. I haven't

                seen a demo of how to do this anywhere either. My goal
                is to set up a partition with the following QoS
                parameters:

                MaxJobsPerUser=5
                MaxSubmitJobsPerUser=5
                MaxCPUsPerUser=128

                Thanks for the info.

                -Paul Edmon-



--

/James Oguya/


______________________________________________________________________

This e-mail contains information which is confidential. It is intended only for the use of the named recipient. If you have received this e-mail in error, please let us know by replying to the sender, and immediately delete it from your system. Please note, that in these circumstances, the use, disclosure, distribution or copying of this information is strictly prohibited. KEMRI-Wellcome Trust Programme cannot accept any responsibility for the accuracy or completeness of this message as it has been transmitted over a public network. Although the Programme has taken reasonable precautions to ensure no viruses are present in emails, it cannot accept responsibility for any loss or damage arising from the use of the email or attachments. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of KEMRI-Wellcome Trust Programme.

______________________________________________________________________