Thank you! On Wed, Jun 28, 2017 at 1:54 PM, Daniel Letai <d...@letai.org.il> wrote:
> Here's a complete slurm.conf which I often use for testing/debugging. > > You can safely drop the GresTypes,DebugFlags lines, or add any other from > man slurm.conf > > > ControlMachine=localhost > AuthType=auth/munge > CryptoType=crypto/munge > GresTypes=a,b > MpiDefault=none > ProctrackType=proctrack/cgroup > ReturnToService=0 > SlurmctldPidFile=/var/run/slurmctld.pid > SlurmctldPort=6817 > SlurmdPidFile=/var/run/slurmd.pid > SlurmdPort=6818 > SlurmdSpoolDir=/var/spool/slurmd > SlurmUser=root > StateSaveLocation=/var/spool > SwitchType=switch/none > TaskPlugin=task/cgroup > FastSchedule=0 > SchedulerType=sched/backfill > SelectType=select/cons_res > SelectTypeParameters=CR_CPU_Memory > AccountingStorageType=accounting_storage/none > AccountingStoreJobComment=YES > ClusterName=cluster > DebugFlags=Backfill,BackfillMap,CPU_Bind,JobContainer,NodeFeatures, > Priority,Protocol,SelectType,Steps,TraceJobs,Triggers,Gres,Energy,Power > JobCompType=jobcomp/none > JobAcctGatherFrequency=30 > JobAcctGatherType=jobacct_gather/none > SlurmctldDebug=debug5 > SlurmctldLogFile=/var/log/slurm/slurmctld.log > SlurmdDebug=debug5 > SlurmdLogFile=/var/log/slurm/slurmd.log > SlurmSchedLogFile=/var/log/slurm/slurmsched.log > SlurmSchedLogLevel=1 > NodeName=localhost NodeAddr=127.0.0.1 RealMemory=1 Sockets=1 > CoresPerSocket=2 ThreadsPerCore=2 State=UNKNOWN > PartitionName=debug Nodes=localhost Default=YES MaxTime=INFINITE State=UP > OverSubscribe=NO > > > BTW, if building on fedora or any other distro that use hardened flags by > default when building packages, you'll have to drop them with something > like; > > rpmbuild -ta <slurm.tar> --define '_hardened_cflags "-Wl,-z,lazy"' > --define '_hardened_ldflags "-Wl,-z,lazy"' > > On 06/28/2017 12:27 PM, Sofiane Bendoukha wrote: > > Hello, > > what the right configuration for a single node (just for testing)? > How should the slurm.conf configured? > > Thank you > > Gridsof > > >
