However, I am setting up a calculating node, not the master node, and
thus I have not installed slurmctld on it.
After some digging, I have found that all these files:
/run/systemd/generator.late/slurm.service
/run/systemd/generator.late/runlevel5.target.wants/slurm.service
/run/systemd/generator.late/runlevel4.target.wants/slurm.service
/run/systemd/generator.late/runlevel3.target.wants/slurm.service
/run/systemd/generator.late/runlevel2.target.wants/slurm.service
Which are a copy of each other and are generated by
systemd-sysv-generator, point to the slurmctld.pid, not to the slurm.pid
[Unit]
Documentation=man:systemd-sysv-generator(8)
SourcePath=/etc/rc.d/init.d/slurm
Description=LSB: slurm daemon management
Before=runlevel2.target
Before=runlevel3.target
Before=runlevel4.target
Before=runlevel5.target
Before=shutdown.target
After=remote-fs.target
After=network-online.target
After=munge.service
After=nss-lookup.target
After=network-online.target
Wants=network-online.target
Conflicts=shutdown.target
[Service]
Type=forking
Restart=no
TimeoutSec=5min
IgnoreSIGPIPE=no
KillMode=process
GuessMainPID=no
RemainAfterExit=no
*PIDFile=/var/run/slurmctld.pid*
ExecStart=/etc/rc.d/init.d/slurm start
ExecStop=/etc/rc.d/init.d/slurm stop
~
How can I make it to avoid this? Besides editing the files manually,
which will go back to the original after reboot.
Thanks,
Ferran
------------------------------------------------------------------------
*From:* slurm-users <slurm-users-boun...@lists.schedmd.com> on behalf of
Rodrigo Santibáñez <rsantibanez.uch...@gmail.com>
*Sent:* Tuesday, June 2, 2020 6:40:48 PM
*To:* Slurm User Community List
*Subject:* Re: [slurm-users] Problem with permisions. CentOS 7.8
Yes, you have both daemons, installed with the slurm rpm.The slurmd (all
nodes) communicates with slurmctld (runs in the main master node and,
optionally, in a backup node).
You do not need to run slurmd as the slurm user. Use `systemctld enable
slurmctld` (and slurmd) followed by `systemclt start slurmctld`. Use
restart instead of start if you change the configuration only if `sudo
scontrol reconfigure` asks for it.
If you run as root `slurmctld -Dvvvv` and `slurmd -Dvvvv` you'll see
debug outputs to see further problems with configuration. The slurmd
needs slurmctld running or will output "error: Unable to register:
Unable to contact slurm controller (connect failure)"
You should find the services here:
-rw-r--r-- 1 root root 339 may 30 20:18
/usr/lib/systemd/system/slurmctld.service
-rw-r--r-- 1 root root 342 may 30 20:18
/usr/lib/systemd/system/slurmdbd.service
-rw-r--r-- 1 root root 398 may 30 20:18
/usr/lib/systemd/system/slurmd.service
Feel free to ask for more information,
Best regards
El mar., 2 jun. 2020 a las 11:12, Ferran Planas Padros
(<ferran.pad...@su.se <mailto:ferran.pad...@su.se>>) escribió:
Hi Ole,
Thanks for your answer and your time. I'd appreciate if you, or
someone else, could make a final look at my case.
After your suggestions and comments, I have re-done the whole
installation for Munge and Slurm. I uninstalled and remoced all
previous rpms and restarted from scratch. Munge works with no
problem, however it does not happen the same with slurm (for which I
have used the instructions given in the link you attached)
- If I run /usr/bin/slurmd -D vvvvv as root user, I get the verbose
until the line 'slurmd: debug2: No acct_gather.conf file
(/etc/slurm/acct_gather.conf)' where the verbose stops. After I do
Ctrl+C, I get
slurmd: all threads complete
slurmd: Consumable Resources (CR) Node Selection plugin shutting
down ...
slurmd: Munge cryptographic signature plugin unloaded
slurmd: Slurmd shutdown completing
- After that, if I run 'systemctl start slurmd' and 'systemctl
status slurmd', also as root user, I get:
*●*slurmd.service - Slurm node daemon
Loaded: loaded (/etc/systemd/system/slurmd.service; enabled; vendor
preset: disabled)
Active: *active (running)*since Tue 2020-06-02 16:53:51 CEST; 33s ago
Process: 2750 ExecStart=/usr/sbin/slurmd -d /usr/sbin/slurmstepd
$SLURMD_OPTIONS (code=exited, status=0/SUCCESS)
Main PID: 2752 (slurmd)
CGroup: /system.slice/slurmd.service
└─2752 /usr/sbin/slurmd -d /usr/sbin/slurmstepd
Jun 02 16:53:51 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: Starting Slurm node daemon...
Jun 02 16:53:51 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: Can't open PID file /var/run/slurm/slurmd.pid (yet?)
after start: No such file or directory
Jun 02 16:53:51 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: Started Slurm node daemon.
- Next, I kill the slurmd process, and I run, as slurm user,
'systemctl start slurm'. Which does not work and returns the
following in the journalctl -xe:
Jun 02 16:56:01 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: Starting LSB: slurm daemon management...
-- Subject: Unit slurm.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit slurm.service has begun starting up.
Jun 02 16:56:01 roos21.organ.su.se <http://roos21.organ.su.se>
slurm[2805]: starting slurmd: [OK]
Jun 02 16:56:01 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: Can't open PID file /var/run/slurmctld.pid (yet?) after
start: No such file or directory
Jun 02 16:56:37 roos21.organ.su.se <http://roos21.organ.su.se>
polkitd[1316]: *Unregistered Authentication Agent for
unix-process:2792:334647 (system bus name :1.46, object path
/org/freedesktop*
Jun 02 16:56:38 roos21.organ.su.se <http://roos21.organ.su.se>
sudo[2790]: pam_unix(sudo:session): session closed for user slurm
Something that I don't really understand because I have not
installed slurmctld. The slurmctld.service file does not even exist.
Any idea?
Many thanks,
Ferran
------------------------------------------------------------------------
*From:* slurm-users <slurm-users-boun...@lists.schedmd.com
<mailto:slurm-users-boun...@lists.schedmd.com>> on behalf of Ole
Holm Nielsen <ole.h.niel...@fysik.dtu.dk
<mailto:ole.h.niel...@fysik.dtu.dk>>
*Sent:* Tuesday, June 2, 2020 12:03:27 PM
*To:* Slurm User Community List
*Subject:* Re: [slurm-users] Problem with permisions. CentOS 7.8
Hi Ferran,
Please install Slurm software in the standard way, see
https://wiki.fysik.dtu.dk/niflheim/Slurm_installation
It seems that you have some unusual way to manage your Linux
systems. In
Stockholm and Sweden there are many Slurm experts at the HPC centers
which
might be able to help you more directly.
Best regards,
Ole
On 6/2/20 11:58 AM, Ferran Planas Padros wrote:
> I did a fresh installation with the EPEL repo, and installing munge from
> it and it worked. To have the slurm user for munge was definitely a
> problem, but that is the set up we have on the CentOS 6. Now I've learnt
> my lesson for future installations, thanks to everyone!
>
>
> Now, I have a follow up question, if you don't mind. I am now trying to
> run slurm, and it crashes:
>
>
> [root@roos21 ~]# systemctl status slurm.service
>
> *●*slurm.service - LSB: slurm daemon management
>
> Loaded: loaded (/etc/rc.d/init.d/slurm; bad; vendor preset: disabled)
>
> Active: *failed*(Result: protocol) since Tue 2020-06-02 11:45:33 CEST;
> 3min 33s ago
>
> Docs: man:systemd-sysv-generator(8)
>
>
> Jun 02 11:45:33 roos21.organ.su.se <http://roos21.organ.su.se> systemd[1]: Starting
LSB: slurm daemon
> management...
>
> Jun 02 11:45:33 roos21.organ.su.se <http://roos21.organ.su.se> slurm[18223]:
starting slurmd: [OK]
>
> Jun 02 11:45:33 roos21.organ.su.se <http://roos21.organ.su.se> systemd[1]: Can't
open PID file
> /var/run/slurmctld.pid (yet?) after start: No such file or directory
>
> Jun 02 11:45:33 roos21.organ.su.se <http://roos21.organ.su.se> systemd[1]: *Failed
to start LSB: slurm
> daemon management.*
>
> Jun 02 11:45:33 roos21.organ.su.se <http://roos21.organ.su.se> systemd[1]: *Unit
slurm.service entered
> failed state.*
>
> Jun 02 11:45:33 roos21.organ.su.se <http://roos21.organ.su.se> systemd[1]:
*slurm.service failed.*
>
>
>
> The thing is that this is a computing node, not the master node, so
> slurmctld is not installed. Why do I get this error?
>
>
> Many thanks, and my apologies for this rather simple questions. I am a
> newbie on this.
>
>
> Best,
>
> Ferran
>
> --------------------------------------------------------------------------
> *From:* slurm-users <slurm-users-boun...@lists.schedmd.com
<mailto:slurm-users-boun...@lists.schedmd.com>> on behalf of
> Renata Maria Dart <ren...@slac.stanford.edu
<mailto:ren...@slac.stanford.edu>>
> *Sent:* Friday, May 29, 2020 6:33:58 PM
> *To:* ole.h.niel...@fysik.dtu.dk <mailto:ole.h.niel...@fysik.dtu.dk>;
Slurm User Community List
> *Subject:* Re: [slurm-users] Problem with permisions. CentOS 7.8
> Hi, don't know if this might be your problem but I ran into an issue
> on centos 7.8 where /var/run/munge was not being created at boottime
> because I didn't have the munge user in the local password file. I
> have the munge user in AD and once the system is up I can start munge
> successfully, but AD wasn't available early enough during boot for the
> munge startup to see it. I added these lines to the munge systemctl
> file:
>
> PermissionsStartOnly=true
> ExecStartPre=-/usr/bin/mkdir -m 0755 -p /var/run/munge
> ExecStartPre=-/usr/bin/chown -R munge:munge /var/run/munge
>
> and my system now starts munge up fine during a reboot.
>
> Renata
>
> On Fri, 29 May 2020, Ole Holm Nielsen wrote:
>
>> Hi Ferran,
>>
>> When you have a CentOS 7 system with the EPEL repo enabled, and you have
>> installed the munge RPM from EPEL, then things should be working
correctly.
>>
>> Since systemctl tells you that Munge service didn't start correctly,
then it
>> seems to me that you have a problem in the general configuration of your
CentOS
>> 7 system. You should check /var/log/messages and "journalctl -xe" for
munge
>> errors. It is really hard for other people to guess what may be wrong
in your
>> system.
>>
>> My 2 cents worth: Maybe you could make a fresh CentOS 7.8 installation
on a
>> test system and install the Munge service (and nothing else) according to
>> instructions in https://wiki.fysik.dtu.dk/niflheim/Slurm_installation.
This
>> *really* has got to work!
>>
>> /Ole
>>
>>
>> On 29-05-2020 10:23, Ferran Planas Padros wrote:
>>> Hello everyone,
>>>
>>>
>>> Here it comes everything I've done.
>>>
>>>
>>> - About Ole's answer:
>>>
>>> Yes, we have slurm as the user to control munge. Following your
comment, I
>>> have changed the ownership of the munge files and tried to start munge
as
>>> munge user. However, it also failed.
>>>
>>> Also, I first installed munge from a repository. I've seen your
suggestion of
>>> installing from EPEL. So I uninstalled and installed again. Same result
>>>
>>> - About SELinux: It is disables
>>>
>>> - The output of ps -ef | grep munge is:
>>>
>>>
>>> root534051530 10:18 pts/000:00:00 grep --color=auto *munge*
>>>
>>>
>>> - The outputs of munge -n is:
>>>
>>>
>>> Failed to access "/var/run/munge/munge.socket.2": No such file or
directory
>>>
>>>
>>> - Same for unmunge
>>>
>>>
>>> - Output for sudo systemctl status --full munge
>>>
>>>
>>> *?*munge.service - MUNGE authentication service
>>>
>>> Loaded: loaded (/usr/lib/systemd/system/munge.service; enabled; vendor
preset:
>>> disabled)
>>>
>>> Active: *failed*(Result: exit-code) since Fri 2020-05-29 10:15:52 CEST;
4min
>>> 18s ago
>>>
>>> Docs: man:munged(8)
>>>
>>> Process: 5333 ExecStart=/usr/sbin/munged *(code=exited,
status=1/FAILURE)*
>>>
>>>
>>> May 29 10:15:52 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: Starting
MUNGE authentication
>>> service...
>>>
>>> May 29 10:15:52 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]:
*munge.service: control process
>>> exited, code=exited status=1*
>>>
>>> May 29 10:15:52 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: *Failed
to start MUNGE
>>> authentication service.*
>>>
>>> May 29 10:15:52 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]: *Unit
munge.service entered
>>> failed state.*
>>>
>>> May 29 10:15:52 roos21.organ.su.se <http://roos21.organ.su.se>
systemd[1]:
*munge.service failed.*
>>>
>>>
>>> - Regarding NTP, I get this message:
>>>
>>>
>>> Unable to talk to NTP daemon. Is it running?
>>>
>>>
>>> It is the same message I get in the nodes that DO work. All nodes are
sync in
>>> time and date with the central node
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* slurm-users <slurm-users-boun...@lists.schedmd.com
<mailto:slurm-users-boun...@lists.schedmd.com>> on behalf of Ole
>>> Holm Nielsen <ole.h.niel...@fysik.dtu.dk
<mailto:ole.h.niel...@fysik.dtu.dk>>
>>> *Sent:* Friday, May 29, 2020 9:56:10 AM
>>> *To:* slurm-users@lists.schedmd.com
<mailto:slurm-users@lists.schedmd.com>
>>> *Subject:* Re: [slurm-users] Problem with permisions. CentOS 7.8
>>> On 29-05-2020 08:46, Sudeep Narayan Banerjee wrote:
>>>> also check:
>>>> a) whether NTP has been setup and communicating with master node
>>>> b) iptables may be flushed (iptables -L)
>>>> c) SeLinux to disabled, to check :
>>>> getenforce
>>>> vim /etc/sysconfig/selinux
>>>> (change SELINUX=enforcing to SELINUX=disabled and save the file and
reboot)
>>>
>>> There is no reason to disable SELinux for running the Munge service.
>>> It's a pretty bad idea to lower the security just for the sake of
>>> convenience!
>>>
>>> /Ole
>>>
>>>
>>>> On Fri, May 29, 2020 at 12:08 PM Sudeep Narayan Banerjee
>>>> <snbaner...@iitgn.ac.in <mailto:snbaner...@iitgn.ac.in>
<mailto:snbaner...@iitgn.ac.in>> wrote:
>>>>
>>>> I have not checked on the CentOS7.8
>>>> a) if /var/run/munge folder does not exist then please double
check
>>>> whether munge has been installed or not
>>>> b) user root or sudo user to do
>>>> ps -ef | grep munge
>>>> kill -9 <PID> //where PID is the Process ID for munge (if the
>>>> process is running at all); else
>>>>
>>>> which munged
>>>> /etc/init.d/munge start
>>>>
>>>> please let me know the the output of:
>>>>
>>>> |$ munge -n|
>>>>
>>>> |$ munge -n | unmunge|
>>>>
>>>> |$ sudo systemctl status --full munge
>>>>
>>>> |
>>>>
>>>> Thanks & Regards,
>>>> Sudeep Narayan Banerjee
>>>> System Analyst | Scientist B
>>>> Indian Institute of Technology Gandhinagar
>>>> Gujarat, INDIA
>>>>
>>>>
>>>> On Fri, May 29, 2020 at 11:55 AM Bjørn-Helge Mevik
>>>> <b.h.me...@usit.uio.no <mailto:b.h.me...@usit.uio.no>
<mailto:b.h.me...@usit.uio.no>> wrote:
>>>>
>>>> Ferran Planas Padros <ferran.pad...@su.se
<mailto:ferran.pad...@su.se>
>>>> <mailto:ferran.pad...@su.se>> writes:
>>>>
>>>> > I run the command as slurm user, and the /var/log/munge
>>>> folder does belong to slurm.
>>>>
>>>> For security reasons, I strongly advise that you run munged
as a
>>>> separate user, which is unprivileged and not used for
anything else.
>>>>
>>>> -- Regards,
>>>> Bjørn-Helge Mevik, dr. scient,
>>>> Department for Research Computing, University of Oslo
