Tushar, Yes, the info showing in the APPO is correct and we should pay attention to 'Client info' values. It will show the correct IP address with other info. The values shows on the both end never be the same but should be close, reason being there is no way can sync to the remote end.
The client info TAB in APPO will help us to determine the approximate close values at the receiving end. Thanks Seeni, sB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tushar Patel Sent: Thursday, June 05, 2003 3:03 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] RSSI and link quality at access point. Seeni, I am very familiar with all the stuff you have answered. I guess I did not make it clear what I was asking. What I am asking is: When I see RSSI and link quality at Airbridge at customers location I see one set of numbers. And then when I see link RSSI and link quality in the associated list of client in APPO I see different set of numbers. When I look at the list of associated client in the APPO, it has 5 columns Number, MAC address, RSSI, LINK quality and IP address. There was a thread few months ago which indicated that ip address show in the table is not correct and we should not pay attention. So, My question is since IP address was not giving correct info does the RSSI and link quality give correct info? and should we pay attention to RSSI and link quality number in associated client list table. Thanks, Tushar > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Seeni > Sent: Wednesday, June 04, 2003 11:53 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] RSSI and link quality at access point. > > > Tushar, > RSSI value is the Received Signal Strength Indicator. This is the power > level of the signal indicated in dBm and the %. These values are very > close to the approximate to the actual values. The values are read from > one of the register in device receive circuit. > We recommend that, you must establish a link with minimum of 70% RSSI > (around -60 ~ 65dBm) > Link Quality is the essential the indicator of "How good is the Signal > to Noise Ratio". We also recommend to keep it at 70% while establishing > the link. > Currently, the RSSI seems to stay on at 100% and we are trying to have a > better algorithm to indicate more accurate values. > > Thanks, > Seeni > sB support > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tushar Patel > Sent: Wednesday, June 04, 2003 10:13 AM > To: '[EMAIL PROTECTED]' > Subject: [smartBridges] RSSI and link quality at access point. > > Hi, > > > We have been installing Airbridge Outdoor and Airbridge Total for some > time. > At every install we check the RSSI and link quality we try to keep above > 60%. > > Few days back I was looking at the associated client at on the access > point. > Access Point also has RSSI and link quality number. Some of the number > on > link quality are quit low, and it does not match the what we see on the > airbridge Outdoor or Airbridge Total. > > So the question, > > 1) Looking at the associated client information on the Airpoint Pro > Outdoor, > the RSSI and Link quality number are accurate? Should we care for theses > numbers too? > > Thanks, > Tushar > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.487 / Virus Database: 286 - Release Date: 6/1/2003 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://198.63.203.6 > --- > Incoming mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.487 / Virus Database: 286 - Release Date: 6/1/2003 > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.487 / Virus Database: 286 - Release Date: 6/1/2003 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
