-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Tom Haynes
Sent: Monday, June 02, 2003 11:20
PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges]
PowerShot info
My plan is not to improve
on the power shot but to develop another solution for multiple AP installs and
allows remote management of the power as well as voltage adjustments for cable
length and power backup.
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seeni
Sent: Sunday, June 01, 2003 11:07
AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges]
PowerShot info
The new powerShot™
SB2811(remote reset) already enhanced with a built-in surge protection circuit.
This circuit provides protection from over voltage caused by ESD (Electrostatic
discharge), EFT (Electrical Fast Transients) and Lightning. The ESD protection
is to withstand to IEC 61000-4-2 specifications of 15KV. The lightning
protection is to withstand IEC 61000-4-5 specification for 12A (8/20 micro
seconds.
Any modification on the powershot
will void the warranty.
Seeni. sB support
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Tom Haynes
Sent: Sunday, June 01, 2003 1:47 AM
To: 'Smart Bridges list'
Subject: [smartBridges] PowerShot info
In the powerShot SB2810 v0.2 (without remote reset)
and the SB2811 v0.1
(with remote reset) there is IC U1 that is connected
to all 4 data pins.
What is U1's function? Also, may I use the info gained
from opening the PS
to create my own solution and post it to this list?
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://198.63.203.6
