RE: [smartBridges] simpleNMS

[Seeni]

Title: Message

SimpleNMS can be best viewed by setting the resolution of 1024 x 786 with 24 bit colors and this is specified in the user guide. The manualentries.txt being lost issue already fixed in ver.1.0. The passwd.txt being lost issue which be addressed in ver.1.1   Regards,      Seeni sB support   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Haynes Sent: Tuesday, June 03, 2003 10:52 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] simpleNMS   I have a similar problem with maximizing on some systems. I haven't located the exact commonalities between the systems yet. When I maximize, the program centers up on an imaginary screen that is about twice the size of my current resolution while maintaining the windows size of my current resolution. (IE. the top left of simpleNMS window is in the center of the screen and all I can see of it is the top left quarter of the window.) This window can not be moved but can be minimized back to it's original size and location by double clicking the title bar or right clicking the program tab on the start bar and clicking 'minimize'.   I also had the problem with the saved manual list being deleated. My password list stayed intact. I believe this has something to do with having with file locations changing between releases. RC2 exe's were in the simpleNMS directory where RC3 and 1.0 put the exe's in simpleNMS/simpleNMS_files. The data files stayed in the same place though. I don't think this is the only problem causing it. It also seems to be time based. I installed the same 1.0 version on a second computer one week after the first install. Both ran fine for some time then the first install started having problems. One week later the second install started having the same problems. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of phantam Sent: Monday, June 02, 2003 8:20 PM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] simpleNMS Theres a problem on terminal server I noticed you cant maximize it stays the same but the button for maximizing changes. Also can we please get some verifications or something on the simplemonitor part of things, im sick of trying to set a remote clients essid and it drops off I get there and the damn thing says sdfgsdfgsdfg for the essid lol or atleast have it fall back if it fails to connect for 2 minutes after a remote change THAT would be nice. PLEASE ADD THIS IN NEXT FIRMWARE and also whats the chances of a remote firmware upgrade getting scrambled? Chris -----Original Message----- From: Seeni [mailto:[EMAIL PROTECTED]] Sent: Monday, June 02, 2003 6:07 PM To: [EMAIL PROTECTED] Hi Tim, Are you referring to the SimpleNMS 1.0 version? This version is more stable and reliable to use with all the airBridge and airPoint series products.  We are continuously improving the products with new features and updated information. Yes, our next release version is under development and I will forward your request to our development team. With the current version 1.0, there is no option to upload the IP address from the txt file. We did not encounter problem in moving the cursor, arrow down and scroll while using the ver.1.0.   Thank you for your feedback and appreciated. Seeni,  sB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, June 03, 2003 5:09 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] simpleNMS This past weekend I had to format the drive on my "junk" server. (stupid piece of crap! Remind me to tell you a story about a guy who paid $1,100 for a used AMD400. *sigh*) at any rate... I don't think I'm usign simpleNMS correctly. If I Search for stuff, it comes back with a list of APs (not all of them) and then shows a weird list of stuff that it can't connect to. If I add them manually, I see pretty, pretty numbers and all's good. All my airBridge CPE passwords are different, and I think this gives simpleNMS fits. Apparently it doesn't like the User password of "public". (should I keep all Admin passwords the same? Seems to me to be better security to have unique passwords for everyone). What's bumming me out is that I have to re-add all those IPs again. Is there a way this can be saved to a text file and pulled back in (the same way a MAC authentication list is done)? And I hope it's just me, but the numbers in simpelNMS don't move quickly, and the screen takes a long time to draw, and when it does, not all screens are drawn correctly: scroll bars missing, cursor may or may not move when you press the arrow keys, etc, etc. I trust these issues are being addressed in a soon-to-be-released version? Thanks. Tim Foster www.AledoBroadBand.com Aledo's only high-speed ISP The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6    The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6