I have an outdoor airbridge that works intermittently. I changed out the powershot same thing. What can I do to fix this. It happened new out of the box. George
----- Original Message ----- From: "Vasu (sB Tech Team)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, May 12, 2003 7:56 PM Subject: RE: [smartBridges] Ether Burnouts > Check the powerShot if its working properly, and repeat the same by > replacing the powerShot. > > Then see if the ethernet light comes up when you connect the device to > your PC using a cross connector. > > Vas > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tegan Snyder > Sent: Tuesday, May 13, 2003 10:33 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] Ether Burnouts > > I have a question for you Vasu. What if the reset switch (after holding > it down for 30sec) doesn't work? > > Tegan Snyder > Split-Wire Wireless Solutions > smartBridges Sales Agent > (308) 991-0771 > www.split-wire.com > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Vasu (sB Tech Team) > Sent: Monday, May 12, 2003 7:21 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Ether Burnouts > > No we have not come with a special program. > > Vasu > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Eric Calkins > Sent: Tuesday, May 13, 2003 8:01 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] Ether Burnouts > > I know that, and the firmware can be reloaded...i just wondered if there > was a special progroam sb came out with :) > > > > > > > > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Vasu (sB Tech Team) > Sent: Monday, May 12, 2003 5:51 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Ether Burnouts > > > You can restore the device to factory defaults from the reset button on > the powerShot. > > > Vasu > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Eric Calkins > Sent: Tuesday, May 13, 2003 6:48 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] Ether Burnouts > > Where can this restore program be found? :) > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tom Haynes > Sent: Monday, May 12, 2003 4:38 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Ether Burnouts > > > It is probably just a firmware ROM error. I used to find AB turned to AP > and the other way around. Do a factory default reset on them then try > logging in to them with the AP simpleMonitor. Also, sB has released a > firmware restore program, try using it. If you were using the latest > firmware you could try to restore over the wireless side. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of [EMAIL PROTECTED] > Sent: Monday, May 12, 2003 1:51 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Ether Burnouts > > > Is anyone else seeing the ethernet ports on the sB Outdoor AirBridges > going dead? > > I have had three of these just totally die within the last week. We have > had some electrical storms lately but these are dying days after the > storm and not close to the day "of" the storm. > > I get power lites, link lites but no ether lites. 3 in one week just > seems odd > > Michael > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
