It depends which type of CPE you are using. The older version of the airBridge firmware passed the MAC of the clients NIC, but the newer versions w/ the remote management only pass the MAC of the airBridge itself. In short, if you are using new version smartBridge devices, then you only need the MAC of the sB in your table. Other devices may vary, so its best to test them out before hand and figure out what MAC's you need to gather from the customer. Ryan
> A question I am having is do I onlu need to add the mac addresses of > the radios? Or do I have to put the macs of the routers/nic/etc behind > the radio? I have some customers that use cisco wgb and when I log in > to the br340 it shows all the eclients. I am replacing all my access > points with app and was thinking about making a file all radio macs to > just upload on all the app's. Stop at the radio or get all macs for > everything and enter them into the radios? > > Am I wasting my time with this or should I just keep Authorization > disabled? > > Thank you, > Jerry The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
