I would also like to see this implemented. Thanks, Tegan Snyder Split-Wire Wireless Holdrege, NE www.split-wire.com 308-991-0771
----- Original Message ----- From: "David Blood" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, June 11, 2003 9:27 PM Subject: [smartBridges] Feature request > In order to provide some redundancy at my towers I use the same ssid for all > APs and leave the BSSID to 0000000000000 on the cpes. This works well most > of the time. The problem with this plan is that some clients radios like to > associate to the ap with the weaker signal.(The antennas do not point in the > same directions.) I am not sure why this happens. I would love to be able > to give a list of the BSSIDS to try to associate with and in what order. I > would still like to be able to put 0000000000000 on the list as in the case > of a hardware failure at the tower you would then not have to reconfige > everyone to get things redundant again. > > Any chance there are others that would/could use this? > > Kind Regards, > > David > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
