When using our AP as repeater, the primary AP has to be from smartBridges due to address 4 field support. You can use our AP and connect to the Mikrotik LAN interface to replace the Mikrotik AP.
Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Me Sent: Friday, June 20, 2003 11:30 PM To: '[EMAIL PROTECTED]' Subject: [smartBridges] Microtik and Smartbridge connectivity We did our site survey today at the first apartment complex. We have changed plans a little. We want to use the outside version of the routerboard, or the inside version if the T-1 is able to be installed inside. If we use Mikrotik as the AP... can we use smartbridges in repeater mode that will talk to the Mikrotik AP. I have this priced out for using the Mikrotik router board with a T-1 Cyclades and a prism card. All of the clients are using Airpoint Bridges The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
