RE: [smartBridges] Only getting 300K from Ranchos Access Point

[John Mooring]

but what you are doing is ampin the signal after the radio limitations. Have you ever read anything on radio wave transmission.   not trying to bust you balls.   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Bobby Bounds Sent: Tuesday, July 01, 2003 9:59 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Only getting 300K from Ranchos Access Point The power on the radio is set to stay within legal limits. ----- Original Message ----- From: John Mooring To: [EMAIL PROTECTED] Sent: Tuesday, July 01, 2003 7:57 PM Subject: RE: [smartBridges] Only getting 300K from Ranchos Access Point So, I thought we weren't allowed to push more than 36Dbi from an intentional radiator in the US. What does your system look like :-)   you might be yelling in your clients ear. If you have a packet sizeing issue also. Go for the RTS settings and threshhold settings.   just a thought John   PS hope the FCC doesn't read this -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Bobby Bounds Sent: Tuesday, July 01, 2003 9:36 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Only getting 300K from Ranchos Access Point Hey guys......here's a good one for you.   I have 10 clients on our "Ranchos" Access Point (APPO, .5 Watt amp, 90 degree, 14db sector). Clients are getting less than 400K download speeds. Clients are between 1/2 mile and 10 miles away. All are connected with signal strengths and link qualities in the high 80's and 90's. The backhaul is an APPO (in CB mode) approx. 3 miles to the POP (T-1). Signal strength and link quality on the backhaul is in the 90's and only varies by 5% or so.   Any ideas as to why clients aren't getting higher speeds (should be around 1 megabit)?   Regards,   Bobby Bounds Airwave Internet, LLC Albuquerque, NM [EMAIL PROTECTED]