RE: [smartBridges] AirPoint PRO Outdoor not bridging

[sB Tech Support]

Title: Message

This is due to Address 4 field Support which is optional in IEEE 802.11 spec and only a few vendors support it. It is essential that both devices support this for communication. So our recommendation is to use airPoint as AP to avoid incompatibility issue.   Alex sB Tech Support     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, July 04, 2003 6:48 AM To: '[EMAIL PROTECTED]' Subject: Re: [smartBridges] AirPoint PRO Outdoor not bridging Alex,   Is there a way the AirPoint PRO can work as a client to third party and bridge LANs?   Does the AirPoint has to be Access Point? ----- Original Message ----- From: sB Tech Support To: [EMAIL PROTECTED] Sent: Thursday, July 03, 2003 1:39 PM Subject: RE: [smartBridges] AirPoint PRO Outdoor not bridging This combination may not work due to aPPO in Client Bridge mode require to talk to another AP from smartBridges.   Alex sB Tech Support     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, July 04, 2003 2:46 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] AirPoint PRO Outdoor not bridging Hi,   I have this AirPoint PRO Aoutdoor (connected to LAN1)configured as a client bridge, connected to a Teletronics CPE Access Point (connected to LAN2). The AirPoint shows an 82% to 90% Link Quality, but I can�t ping from a PC connected on LAN1 to Teletronics AP or any PC on LAN2.   PCs at LAN2 can ping the AirPoint but cannot ping PCs on LAN1.   Seems like the AirPoint is not allowing packets through.   I just upgraded to firmware 1.4.j.6 from 1.4.j.4.   Any ideas? Can I downgrade to see if it�s the firmware problem?   Thanks   Pablo Quintana