The new “Super” Powershot that
we are coming up with will not have wire at all. So this will give you less
point of failure.
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of phantam
Sent: Friday, July 11, 2003 10:09
AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges]
Powershot
Umm how bout NO BOOT AND NO WIRE just a clearly
labeled jack like the side for the radio wouldn't that be nice and a plug on
the side for u to plug the Power Supply into that properly fits. No wires
coming out of the POE itself that are hard wired just wires that plug into it
htereby less points of failure eon the POE (jacks instead of lil dinky wires)
-----Original Message-----
From: Kevin Summers [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 10, 2003 6:21
PM
To: [EMAIL PROTECTED]
Boot the boot.
Kevin Summers
KISTech Internet Services Inc.
www.kistech.com
> -----Original Message-----
> From:
[EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On
Behalf Of Patrick
> Sent: Thursday, July 10, 2003
1:38 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges]
Powershot
>
>
> I also HATE the boot....
> ----- Original Message -----
> From: "Roger Howard"
<[EMAIL PROTECTED]>
> To:
<[EMAIL PROTECTED]>
> Sent: Thursday, July 10, 2003
4:21 PM
> Subject: Re: [smartBridges]
Powershot
>
>
> > Ok, I'm fine with that...
eliminate the boot.. and spend the
> extra 2c you
> > spared on a better power
socket... then we'll have the perfect
> powershot.
> >
> > It looks a bit nicer and
finished with a boot on it, but
> functionality is
> > more important.
> >
> > Thanks,
> > Roger
> >
> > ----- Original Message -----
> > From: "Eric
Calkins" <[EMAIL PROTECTED]>
> > To:
<[EMAIL PROTECTED]>
> > Sent: Thursday, July 10,
2003 3:11 PM
> > Subject: Re:
[smartBridges] Powershot
> >
> >
> > > I agree, it does not
need to be there. Pain in the butt!
> > >
> > > Eric :)
> > >
> > >
> > >
> > >
> > > Dan Petermann wrote:
> > >
> > > > Get rid of it
all together, I hate those things. I take
> the scissors
> on
> > > > my leatherman
and
> > > > cut it off.
> > > >
> > > > Dan Petermann
> > > > wyoming.com
> > > >
> > > > At 03:02 PM
7/10/2003 -0500, you wrote:
> > > >
> > > >> While we're
talking about powershots, for the next version, can you
> > > >> make the
> > > >> boot on the
RJ45 connector that goes into the PC/switch a
> bit softer
> > > >> plastic?
It's sometimes next to impossible to squeeze the thing
> enough
> > to
> > > >> unclip it.
My thumb is still hurting from the last one I had to
> > > >> unplug.
It's
> > > >> especially
difficult because these are often plugged in in very
> awkward
> > > >> places. You
almost need a pair of plyers to get them out!
> > > >>
> > > >> Thanks,
> > > >> Roger
> > > >>
> > > >> The
PART-15.ORG smartBridges Discussion List
> > > >> To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> > > >>
smartBridges <yournickname>
> > > >> To Remove: mailto:[EMAIL PROTECTED] (in the body
type
> unsubscribe
> > > >>
smartBridges)
> > > >> Archives: http://archives.part-15.org
> > > >
> > > >
> > > >
> > > > The PART-15.ORG
smartBridges Discussion List
> > > > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> > > > smartBridges
<yournickname>
> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe
> > > > smartBridges)
> > > > Archives: http://archives.part-15.org
> > > >
> > >
> > > The PART-15.ORG
smartBridges Discussion List
> > > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> > smartBridges
<yournickname>
> > > To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe
> > smartBridges)
> > > Archives: http://archives.part-15.org
> >
> > The PART-15.ORG
smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> smartBridges
<yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe
> smartBridges)
> > Archives: http://archives.part-15.org
>
> The PART-15.ORG smartBridges
Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
> smartBridges
<yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body
type
> unsubscribe smartBridges)
> Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://archives.part-15.org
