Do you have the SKU for that box? JH ----- Original Message ----- From: "Eje Gustafsson" <[EMAIL PROTECTED]> To: "Marcel Muntean - BWN" <[EMAIL PROTECTED]> Sent: Saturday, July 12, 2003 5:02 PM Subject: Re: [smartBridges] Simplify
> Tessco have some 6x6x2 nema boxes that are very similar to the boxes > the Total's come in. You could take out the guts from the sB unit > place it inside this box and do a short cat5 pigtail to a passthrough > or keystone jack and drill a whole big enough to get the antenna > through. Then you would have a small square box with antenna sticking > out, a power cable coming out of and a plug for a cat5. > > Put a sticker on it with your name or the hotel name. Heck if you > wanted you could probably just run the cat5 out through a compressing > fitting that way all the customer need to do is plug in the powerplug > and plug in the attached cat5 to their laptop. > > Best regards, > Eje Gustafsson mailto:[EMAIL PROTECTED] > The Family Entertainment Network http://www.fament.com > Phone : 620-231-7777 Fax : 620-231-4066 > - Your Full Time Professionals - > eBay UserID : macahan > --- > searchable smartBridges mailing list archive. > http://www.mail-archive.com/smartbridges40part-15.org/ > -- > MMB> I have just built the attached monster. I have taken the power supply as well as the powershot apart, installed them in the white box and screwed the AirBridge to the box. I have done this > MMB> to simplify the install in a hotel where people rent an airbridge ocasionally and have to deal with all the wires and powershots... > MMB> This way there is only a 120V cord and one CAT5 that goes into the guest's laptop. It took me 30 minutes to do it, but I rather not. Anybody has doen something like this that looks better, > MMB> or, SB, interested to put everything in one box? > MMB> Or, am I overreacting? > > > MMB> THANK YOU! > > -- > [This E-mail scanned for viruses by Declude Virus] > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
