Now that is worth trying. I am pretty sure I have some older versions of simpleMonitor.
Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Summers Sent: Thursday, July 24, 2003 12:17 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Cant log into units?? Have you tried a different version of SimpleMonitor? Since you are telling it no when it asks if you want to upgrade the firmware, maybe using the version of SimpleMonitor that goes with that firmware will work. (I've seen this behavior on the AirBridges..) Just a thought. Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of The Wirefree Network > Sent: Thursday, July 24, 2003 11:59 AM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units?? > > > Hmmm...that would require 1 of 2 things: > 1. The client to have the simpleMonitor software and admin password. > 2. or A rollout to clients home to log in on the wired side. > > I don't give the client the software...it just begs them to mess with > things. > > I can not change the password from here. > > I find it hard to believe that this is a corrupted packet problem. All > of my clients are within .5 mile. One is only 50 ft and I cant log into > it. > > Also...if they do a factory default restore...then my password works > again. I never changed it once I burned it in with simpleDeploy. > > What is different about simpleMonitor logging into a unit and MRTG > polling it or simpleNMS polling it for stats?? There must be some > difference....because simpleMonitor is the only thing that doesn't work. > > One more tidbit of info. Now that I have upgraded the firmware on a few > of my bad units, the latest firmware is located in the airBridge folder. > So...now when I attempt to log into the clients airBridge using the > admin password, the first thing I get is, "Do you want to upgrade the > firmware...". I say "NO", and then it gives me the "bad password" crap. > > I am stumped. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of sB Tech Support > Sent: Thursday, July 24, 2003 10:47 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units?? > > Does login on the wired work? At times, the packet could be corrupted in > the wireless transmission, try a few more times. Pls do one test, change > the password to just single character, can work? > > Alex > sB Tech Support > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Friday, July 25, 2003 2:09 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] Cant log into units?? > > > Wow...this has me really stumped. > > If I get the client to do a "restore to factory default", then I can log > right in. > > If I wirelessly use simpleDeploy on the airPoints (airBridges down allow > this), then I can log right into the units. > > Otherwise, I can not log in. I get this error message "Can not Read the > airBridge Configuration...Check your password." > > Please...does anyone have a clue on what could be causing this?? > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Saturday, July 19, 2003 11:20 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units?? > > BTW...I did not upgrade any of these units to the new BETA firmware. > So...it's not that either. > > As a matter of fact, I haven't done anything to these units. I bet that > a manual "restore to factory default" by the client would allow me to > log in again. But....being that the units are working still, I really > don't want to bother the client. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Saturday, July 19, 2003 11:11 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cant log into units?? > > MORE INFO: > Rebooting the devices with simpleNMS does NOT work. I still can not log > into 75% of my units (aP, aPPo, aB, aBO). > > I used simpleDeploy to reflash the "bad" aPPo-CB units (aPPo's and aP's > are the only ones I can still wirelessly use simpeDeploy on). Once I > reflashed them with simpleDeploy, I was able to log in as normal with > simpleMonitor. > > 1. simpleDeploy uses the ADMIN password. So...obviously, I know my > passwords. So...please don't suggest bad password. > > 2. I have simpleNMS loaded with my ADMIN passwords as well, and I am > able to see stats and perform reboots. Once again proving that I know > all my passwords. > > 3. MRTG is polling the units every 5 minutes with the USER passwords. > One last time proving that I know my passwords. > > So....why am I all of a sudden unable to log into 75% of my units (very > old and very new units)?!?!?! > > Why does reflashing them with simpleDeploy fix the problem??? > > About 30 of my units are aB or aBo's, so I cant use simpleDeploy to fix > the problem. > > Anyone have any suggestions??? > > Sully > > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Saturday, July 19, 2003 9:58 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Cant log into units?? > > For some odd reason, I can not log into a lot of my units using > simpleMonitor. I have tried both the admin and user passwords as well. > > To add to the oddness, simpleNMS is able to talk with all the units > (obtaining their stats, etc). But when I choose MANAGE (which opens > simpleMonitor--also using my ADMIN password), I get the "Can not > read...check your password" crap. > > Same thing happens when I try to open it with simpleMonitor directly. > > More oddness....MRTG is polling the units just fine, obtaining their > usage, RSSI and LQ...using the USER password. > > I am stumped. I don't know when this started...cause I don't normally > log into the units unless there is a problem. I had one that wouldn't > let me in today, so I tried all of them. > > To recap...I can not log into over half of my units (about 35 of the 45) > using either the ADMIN or USER password > > What the heck I am doing wrong....duh....am I forgetting something > really stupid??? > > Sully > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
