Our experience has been that 0.09.10 will allow PPPoE or DHCP, hotspots but
only  with one MAC client.

The next version is SUPPOSED to allow multiple MAC addresses, but so far we
have not been able to pass anything through it. PPPoE doesn't work, DHCP
doesn't work, can't even ping the gateway. Flash it back to 0.09.10 and
everything works fine. We have tried with 4 or 5 different radios over the
last several months with the same results everytime. Last test was this
morning with a brand new SB just in.

John
----- Original Message ----- 
From: "Kevin Summers" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 25, 2003 05:27 PM
Subject: RE: [smartBridges] AirBridge Firmware release 0.01.07


>
> I'll test it all again with both versions of the
> firmware and let you know.
>
> Kevin Summers
> KISTech Internet Services Inc.
> www.kistech.com
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] Behalf Of sB Tech Support
> > Sent: Friday, July 25, 2003 5:21 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [smartBridges] AirBridge Firmware release 0.01.07
> >
> >
> > That does not make sense, it should be the other way round, in 01.04
> > ver, it is supporting multimac and the only thing is PPPoE does not able
> > to work properly unless is using RASPPPoE client.
> >
> > With using 0.09.10 in your setup, and two routers behind it, it can work
> > susprising for multimac, think I need to go back to the lab to verify
> > that. If remove the Linksys router with all the PC (Laptop connected to
> > the switch), does it work or make a difference?
> >
> > Alex
> > sB Tech Support
> >
> >
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Summers
> > Sent: Saturday, July 26, 2003 8:07 AM
> > To: '[EMAIL PROTECTED]'
> > Subject: RE: [smartBridges] AirBridge Firmware release 0.01.07
> >
> >
> >
> > Ok. Now I'm confused.
> >
> > Just a month ago I had upgraded some of my radios to
> > the next version up from 0.09.10 to gain the long awaited functionality
> > of being able to monitor and configure the radio from remote.
> >
> > Once I did that, several things happened.
> >
> >  - It was no longer able to pass multiple MACs
> >  - It would no longer allow our PPPoE login scheme
> >
> > We dropped it back to the 0.09.10 firmware and it's now able
> > to allow multiple MACs and allows them to login using PPPoE.
> >
> > I've tested this in the shop with the following setup.
> >
> >
> >                    Internet
> >                        |
> >                        |
> >              MikroTik (PPPoE Server)
> >                        |
> >                        |
> >                  Linksys WAP11
> >                        |
> >                        |
> >              SmartBridges AirBridge
> >                        |
> >                        |
> >              Hawking 5 port switch
> >                    |       |
> >                    |       |
> >                Linksys    Linksys
> >                 Cable/     Cable/
> >                  DSL        DSL
> >                 Router     Router
> >                   |          |
> >                   |          |
> >                 Laptop     Laptop
> >
> >
> > Kevin Summers
> > KISTech Internet Services Inc.
> > www.kistech.com
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED] Behalf Of sB Tech Support
> > > Sent: Friday, July 25, 2003 4:20 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: RE: [smartBridges] AirBridge Firmware release 0.01.07
> > >
> > >
> > > We will definitely have separate firmware fix for the 0.09.10 which is
> >
> > > single mac transparent device.
> > >
> > > Alex
> > > sB Tech Support
> > >
> > >
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
> > the body type unsubscribe smartBridges)
> > Archives: http://archives.part-15.org
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type
> > unsubscribe smartBridges)
> > Archives: http://archives.part-15.org
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to